What was done to your rig this week?

[tastethebeast]

ARB covers front and rear!

 

[spinuck]

Changed unit bearing, caliper, rotor, pads on front passenger side. Pics turned out fuzzy :rolleyes2: Thanks WAL, used some of your write-ups and torque info.

 

[10frank9]

Changed unit bearing, caliper, rotor, pads on front passenger side. Pics turned out fuzzy :rolleyes2: Thanks WAL, used some of your write-ups and torque info.

View attachment 99054

Okay is it the Rum, or is this one of those pictures you need to squint and stare at to see clearly? :cheesy:

 

[gtony12]

Okay is it the Rum, or is this one of those pictures you need to squint and stare at to see clearly? :cheesy:

Frsnk must be the rum just had 3 captains and coke. :beer:

Sent from my SCH-I545 using WAYALIFE mobile app

 

[MTG]

ARB covers front and rear! View attachment 98962

Are you doing the Tebow while taking the pic? :idontknow:

 

[MTG]

Changed unit bearing, caliper, rotor, pads on front passenger side. Pics turned out fuzzy :rolleyes2: Thanks WAL, used some of your write-ups and torque info.

View attachment 99054

Okay is it the Rum, or is this one of those pictures you need to squint and stare at to see clearly? :cheesy:

Sorry, I only see a completely blacked out picture. :thinking:

 

[StrizzyChris]

Sorry, I only see a completely blacked out picture. :thinking:

Too much Rum then....or just enough, either way your right!

 

[Ktoth87]

Installed a set of shittybilt fenders. They'll do fine for now. Got a killer deal on them on Craigslist brand new. Figured I would mess up if I cut the factory.

 

[cozdude]

Are you doing the Tebow while taking the pic? :idontknow:

:cheesy: good eye MTG! Lol

 

[Strike Force Zebra]

Built a support to mount a shelf to. I plan on putting all my must haves to leave in the Jeep so they are out of sight!

 

[sean.m.adams33]

View attachment 99193
Built a support to mount a shelf to. I plan on putting all my must haves to leave in the Jeep so they are out of sight!

Looks good, does it slide in and out?

 

[Strike Force Zebra]

Looks good, does it slide in and out?

I am using the seat bracket nuts in the front and 4 1/4" bolts through the tub into the back quarter panel holes( undid the tail lights to access) in the rear. Takes about 4 minutes to bolt in.
I wanted to make it so I can take it in and out but would be secure in the event of a flop or role.

I have a bunch of these(6) with tools and gear in that slide under it. There is room for axle shafts too. I can even access the cubby to some degree. The plan is to cover the board with carpet and have anchor spots to secure to the top if needed.

 

[QRS]

For the first time, I've cleaned the engine bay. Simple green, pressure washer and some tire foam to finish it.



Installed the 40" led light bar in the Gobi roof rack



Next, install the Dynomax exhaust.



Sunday fun!!! :beer:

 

[2013rubirick]

Just got done installing a brand new warn zeon 10-s winch. Found it on craigslist in the sealed box for $800

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

 

[MR.Ty]

Just got done installing a brand new warn zeon 10-s winch. Found it on craigslist in the sealed box for $800

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

Damn that is a steal!

Sent from a galaxy far far away.

 

[2013rubirick]

Damn that is a steal!

Sent from a galaxy far far away.

That's what I thought 2. I was gonna buy a new one then seen it on craigslist about an hour drive from my house and couldn't pass it up.

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

 

[bkac]

That's what I thought 2. I was gonna buy a new one then seen it on craigslist about an hour drive from my house and couldn't pass it up.

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

Great find! I'm hoping to find front and rear PR's like that. Lol

Sent from my VS980 4G using WAYALIFE mobile app

 

[2013rubirick]

Great find! I'm hoping to find front and rear PR's like that. Lol

Sent from my VS980 4G using WAYALIFE mobile app

Lol well find a front for me also.

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

 

[Rivalicon]

bought some 17" cranks with 315 70 17 durotracks tires. Now to tint the windows and buy a winch.

 

[donovsg]

Homemade "dead pedal"

My son and I decided to try to manufacture a dead pedal. Spent just under $10 at Lowes, some time drawing, drilling, some JB Weld, sanding and painting and it turned out not too bad. We may try to change the angle a little after we drive with it for a week or 2.