Search results

I was checking diff fluid today and noticed these randomly cut wires hanging down by the front diff. I’ve had a wheel speed sensor issue on the front left wheel and changed out multiple sensors and never solved the issue. Could these wires be for the abs sensor? Sent from my iPhone using WAYALIFE

I’ve been following Eddie’s beadlock mounting video, and been mounting XD229s on Cooper STT Pros 37x13.50R17. Just wondering if this little bit of gap looks about right? I have been using the Tekton 3/8 in torque wrench, going around and around. In the video it sounds like there should be...

Just wondering if there is a certain type of grease I should be using for my Dynatrac Balljoints. I mostly just use two greases a heavy duty grease for greasing hinges, and joints. I also just use RCV grease on my shafts. Not sure what I should be using on the balljoints. Sent from my iPhone...

Hey guys, have my ProRock 44 installed, and the welded on bracket from the previous owner is only about a 1 inch opening. Does anyone know a steering stabilizer that could fit this? Does this look like it was for a PSC setup? Don’t mind how off centered the axle is, got an adjustable...

Hey Guys I recently purchased a used ProRock 44, and a built rear 44 with an arb, chromoly shafts, truss, etc. The upper control arm bushing on the ProRock 44 look a little chewed up. Are there replacement ones for sale and is it even worth replacing them? Sent from my iPhone using WAYALIFE...

My Jeep now has 96k miles on it, and to my knowledge spark plugs haven't been changed out. I assume I may as well do this as it seems very simple. Is there any point in getting the "High Performance" Spark Plugs, and Wiring from RIPP, or is it a pointless waste of money, and I should just get...

Well since today is payday I figure it is time to ditch the Rough Country lift, and match all my other EVO parts with an EVO lift. I have a few questions for you guys 1. I have watched a few videos of people swapping coils, and they only do one corner at a time. Can I get enough droop from...

This “CRAWLER” is always driving to my local mall Sent from my iPhone using WAYALIFE mobile app

That’s weird, I installed an RPM Fab tie rod last weekend, with the GM offset one ton ends. I have the Method Standard wheels 17x9, 4.5 backspacing, -12 offset. I have a nice amount of clearance. Sent from my iPhone using WAYALIFE mobile app

I’m not sure if I somehow installed these end link incorrectly. They’re probably the easiest thing I’ve installed on my Jeep. I notice every time I’m done driving the end links are fully maxed out twisted. I attached a photo. Is this normal? Sent from my iPhone using WAYALIFE mobile app

Installed a new pair of Truck Lites today, can’t wait to use them in the dark Sent from my iPhone using WAYALIFE mobile app

I’m here in Chicago and am having trouble finding someone to weld these sliders on. Just got a quote from a shop for $550 to install, no powder coating, just welding. Seems a little high? Sent from my iPhone using WAYALIFE mobile app

Another Facebook marketplace gem. “2005 H1 Hummer chassis shortened and narrowed to fit a 2007 4 door Jeep Saraha Unlimited. Body mounted and motor 5.9 Cummins has been set. Built transmission (700 hp) included but not mounted. Tons of parts included.” Sent from my iPhone using WAYALIFE...

Found this gem on Facebook marketplace. Posted from the south side of Chicago. I like the painted black hood, the Mercedes looking wheels, and how all four pods up top aren’t at all lined up together. Sent from my iPhone using WAYALIFE mobile app

Sent from my iPhone using WAYALIFE mobile app

D30 Front, but at least it’s got a truss right? Sent from my iPhone using WAYALIFE mobile app

I've been reading and lurking around for a few months now, and realized I should probably give you guys a wave. I'm from Chicago, and I'm about to start building up my JKU. I've learned so much from you guys. Cole :D