What was done to your rig this week?

swampdog

New member
Soooooo...I ordered a set of 5 Method 105 Beadlocks ImageUploadedByWAYALIFE1469486621.346958.jpg

I will be painting the rings gold, so I figured it was time to switch out the white wayalife side decals with gold, and add some cowl decals while I was at it.

Before : ImageUploadedByWAYALIFE1469486722.637481.jpg

After: ImageUploadedByWAYALIFE1469486749.243214.jpg

Eddie, the gold vinyl you use for these is so nice. Keep it up
 

WJCO

Meme King
Soooooo...I ordered a set of 5 Method 105 Beadlocks .

I will be painting the rings gold, so I figured it was time to switch out the white wayalife side decals with gold, and add some cowl decals while I was at it.

Before :

After:
Eddie, the gold vinyl you use for these is so nice. Keep it up

That's gonna look nice.
 

Ddays

Hooked
That gold looks cool. Looking forward to seeing your wheels all done up. I don't think I've ever seen your rig...do you have a build thread? I didn't see it.
 

WJCO

Meme King
That gold looks cool. Looking forward to seeing your wheels all done up. I don't think I've ever seen your rig...do you have a build thread? I didn't see it.

I was thinking that same thing. Where's your build thread swampdog?
 

christov11

New member
grabbar.jpg

so I learned a valuable lesson last night...

I had the bright idea of installing these at 11PM... was a little too eager...

Dropped a nut in one of the A pillars and a bolt in the other :clap2: good job chris! :clap2:

Now Im gonna have to undo both Apillars to get those rattling sonsabiches........
 

mstraw9379

Member
Replaced front brakes pads and calipers. Finished up this morning in due to a big Strom rolling in when I was halfway done last night.
 
Today I installed the Banks Air Intake. Now, I'm not here to get into any sort of philosophical discussion about butt dynos, MPG gains or losses, HP, etc...

No, I installed it for a purely scientific reason. It's 115 freaking degrees here in the AZ desert, and with heat, air becomes less dense...hence less oxygen. The Banks has a bigger hole, a fatter tube, and monstrous filter. My theory is it will get more oxygen into my engine. Whatever the outcome, at least it looks cool. :beer:
Now I need to add the matching exhaust...

20160726_190420.jpg
 

swampdog

New member
That gold looks cool. Looking forward to seeing your wheels all done up. I don't think I've ever seen your rig...do you have a build thread? I didn't see it.

I was thinking that same thing. Where's your build thread swampdog?

Ahhhhhh, yeah, shame on me. No build thread, I was the first guy to buy a jeep and say I'm not modifying it, then do a lift and say I'm done, the tires, and say I'm done, and then...........first guy ever, right?

Sometime soon, I will play catch up and put together a build thread.
 

AlStew

New member
Got poison spyder armor to cover up the old psc boat sides I used to have. One side lined up fine. One side didn't even line up at all and had to drill out all the holes. Good ol' transamerican manufacturing!

ImageUploadedByWAYALIFE1469757821.106313.jpg

Also I wouldn't recommend the liners. They look like they were cut with the most dull scissors you can find. Just make your own.

ImageUploadedByWAYALIFE1469757963.579302.jpg

Good news! Fresh powder coat on the sliders look so good!

ImageUploadedByWAYALIFE1469757995.402498.jpg
 

RockyJk

Active Member
Got poison spyder armor to cover up the old psc boat sides I used to have. One side lined up fine. One side didn't even line up at all and had to drill out all the holes. Good ol' transamerican manufacturing!

View attachment 214891

Also I wouldn't recommend the liners. They look like they were cut with the most dull scissors you can find. Just make your own.

View attachment 214892

Good news! Fresh powder coat on the sliders look so good!

View attachment 214893

Looks good Al! I see that rock rash on your rear door is still there lol
 

dillard09

New member
Got poison spyder armor to cover up the old psc boat sides I used to have. One side lined up fine. One side didn't even line up at all and had to drill out all the holes. Good ol' transamerican manufacturing!

<img src="http://wayalife.com/attachment.php?attachmentid=214891"/>

Also I wouldn't recommend the liners. They look like they were cut with the most dull scissors you can find. Just make your own.

<img src="http://wayalife.com/attachment.php?attachmentid=214892"/>

Good news! Fresh powder coat on the sliders look so good!

<img src="http://wayalife.com/attachment.php?attachmentid=214893"/>

Looking good Al!
 

Zstairlessone

New member
Soooooo...I ordered a set of 5 Method 105 Beadlocks <img src="http://wayalife.com/attachment.php?attachmentid=214511"/> I will be painting the rings gold, so I figured it was time to switch out the white wayalife side decals with gold, and add some cowl decals while I was at it. Before : <img src="http://wayalife.com/attachment.php?attachmentid=214512"/> After: <img src="http://wayalife.com/attachment.php?attachmentid=214513"/> Eddie, the gold vinyl you use for these is so nice. Keep it up

Man that gold looks nice against your black Jeep, great choice
 
Top Bottom