Front Wheel Hub

I have a 2012 jeep 2 door Rubicon with 35 tires on it my driver side front wheel bearing is sloppy. I have found different brand of Hub assembles is on brand better then the next or does it really matter other than the cost? I have look for torque setting I on the 36mm axle nut 175 # and 100# not sure which one is correct I think it should be 175#. Any help would be appreciated.

I went with the timkin unit bearings. There is a thread in the write up section. You can get both sides for less than one mopar unit bearing.

As for torque settings I believe it's 120# but that should be in the write up as well.

http://wayalife.com/showthread.php?19332-Jeep-JK-Wrangler-Unit-Bearing-Replacement-Write-Up