Clay's Little Build

notnalc68

That dude from Mississippi
Ok. So that was a pretty big job. I'm going to try to do a write up on it.

ImageUploadedByWAYALIFE1466538659.554379.jpg

I can tell you this...it is easier, if you pull the crossmember.
 

notnalc68

That dude from Mississippi
I put the EVO 2" coils back up front, & added some Old Man Emu 2" springs (#2617) to the rear. It rides nice and soft, now.

Stock, with 33 inch Duratracs

ImageUploadedByWAYALIFE1468115065.047913.jpg


With 2.5" of spacers front, & 1" rear

ImageUploadedByWAYALIFE1468115127.875942.jpg


With the new coils

ImageUploadedByWAYALIFE1468115163.788376.jpg
 
Last edited:

notnalc68

That dude from Mississippi
Finally installed a CB. Cobra 75 wxst, and Jeep licensed external speaker. I used a Rugged Ridge tire carrier antenna mount, and ran a ground wire into the cab, for the Fire Stik antenna. I used this write up as a guide. The only thing I did different, is to use a rubber isolator for the hole he ran the power wire through.

http://wayalife.com/showpost.php?p=504174


Speaker location

ImageUploadedByWAYALIFE1468972248.927524.jpg

Mike location

ImageUploadedByWAYALIFE1468972278.332239.jpg
ImageUploadedByWAYALIFE1468972294.220554.jpg

I used this mike mount

ImageUploadedByWAYALIFE1468972581.000535.jpg
 
Last edited:

notnalc68

That dude from Mississippi
Well, that's it. Alice is gone. The wife wanted a JKU, so I bought a 2014 Unlimited Rubicon, with 23,000 miles on it. Of course, it's Anvil. Since it is my second Anvil Jeep, his name is Anvil II, and I'll call him, "Deuce."

Goodbye, Alice. sorry i didn't finish you, but some lucky person is going to get a sweet Jeep, in Paragould, AR.

ImageUploadedByWAYALIFE1467936745.415869.jpg
ImageUploadedByWAYALIFE1470366264.087962.jpg
ImageUploadedByWAYALIFE1470017415.519338.jpg

Hello, Deuce.

ImageUploadedByWAYALIFE1470447819.062486.jpg

Now, I'm off to buy a windshield decal (from the Wayalife store, not eBay).

THE END
 
Top Bottom