mo0s3
New member
The holes are for rosette weld I believe , could be wrong [emoji16]
Evo Mfg Gen 2 Rock Sliders??
- Thread starter Benito
- Start date
The holes are for rosette weld I believe , could be wrong [emoji16]
Rb1boxer_3
New member
I meant the hole on the frame buy already did.
Rb1boxer_3
New member
Mine stick out a little further in the rear. That's why I was freaked about a few pages back thinking I welded on the wrong sides!
Here's where mine went:
Perfect thanks. That's what I needed to see was that first hole in the very front
Rb1boxer_3
New member
Well I did it and finished 5 hrs later . It's a real B**** doing it by yourself. I haven't welded in about 3.5 years so maybe it wasn't a good idea for thus to be my first welding mod but oh well the first one came out like I have enough popcorn for everyone. The rest came out just right. 
now on to the next project.
now on to the next project.Attachments
Bumping an old thread
I am looking for an image of how the rear mounts to the frame.
Basically I am curious of this works with new LA mounts.
Thanks in advance. :beer::beer:
Matt
I have the Gen 1 sliders but here's a shot of how they mount up on the frame with our high clearance long arm brackets. Hope this helps.
Sent from my iPhone using WAYALIFE mobile app