Noise question, help please

Hello everyone, I would greatly appreciate your help if you can help me figure out what this noise is.
It's everytime I push my clutch pedal down or release it after driving for awhile. It's a creaking sound, my clutch feels fine, everything shifts fine no issues. I was thinking it may be the little pivot ball on my clutch fork? Might be dry? Would there be a way to grease it without dropping the transmission?
Any help would be great, this noise is starting to drive me crazy. Lol it's coming from the bell housing for sure, next to where my Slave Cylinder goes in. That's why I was thinking the clutch forks pivot ball.

Here's a link to what is going on

https://youtu.be/MQVAXGcTxxY

Thank you for looking at my post

Could be the release bearing on the clutch is worn,

Bump

Sent from my SM-G935T using WAYALIFE mobile app

Have someone else push the pedal while you go underneath and look. Hard to say what's causing it.

Over the years I've heard of that same creaking clutch pedal issue being remedied by many things, starting from a simple gear oil change, to slave cylinder to TOB.

If you haven't changed tranny fluid in while start with that.
Then if that doesn't help try replacing the slave cylinder.

If that doesn't do it then your likely looking at a TOB.


Sent from Earth to Space and back...can ya give it a second!? WAYALIFE mobile app

I'd have to go with slave cylinder.