The long and slow build of "................"

10abadilla/jk

10abadilla/jk

New member
Got my cover primered and 2 coats of tractor paint. I'm hoping is dried enough tonight to slap it on.
20161229_193011.jpg 20161229_201335.jpg 20161229_204146.jpg 20161229_204150.jpg
I will update pictures when the paint sets and dries. And when I put it on.

Sent from my LG-H900 using WAYALIFE mobile app
 
10abadilla/jk

10abadilla/jk

New member
I wanted a little project this morning. So I painted an old small shovel I had and strapped it to my high lift. Not a big mod but kept me busy with the jeep for a bit. 20170101_143325.jpg

Sent from my LG-H900 using WAYALIFE mobile app
 
10abadilla/jk

10abadilla/jk

New member
Finally got the front diff cover in before the rain. 20170108_103611_HDR.jpg 20170108_105626.jpg 20170108_111543.jpg 20170108_111548.jpg 20170108_114713.jpg 20170108_114747.jpg 20170108_114742.jpg
One question I do have is does the wear on the ring look normal? When I did the rear it wasn't scribed on the edges like the front one is. Is it considered normal wear?

Sent from my LG-H900 using WAYALIFE mobile app
 
WJCO

WJCO

Meme King
10abadilla/jk said:
Finally got the front diff cover in before the rain. View attachment 237700 View attachment 237701 View attachment 237702 View attachment 237703 View attachment 237704 View attachment 237705 View attachment 237706
One question I do have is does the wear on the ring look normal? When I did the rear it wasn't scribed on the edges like the front one is. Is it considered normal wear?

Sent from my LG-H900 using WAYALIFE mobile app
Click to expand...

Teeth edges look chipped a little to me. Other than that, the contact pattern looks OK.
 
WJCO

WJCO

Meme King
10abadilla/jk said:
That's what I thought. I didn't see any metal chunks or shavings. Oil was just a bit metallic which I understand to be normal.

Sent from my LG-H900 using WAYALIFE mobile app
Click to expand...

Next time you have the cover off, look back at the pinion gear. Usually a single chip on the pinion gear will cause the ring gear teeth to have multiple chips that look the same as one another. If you don't hear noise and there wasn't a lot of metal, I wouldn't think it would leave you stranded, but keep an eye on it.
 
10abadilla/jk

10abadilla/jk

New member
WJCO said:
Next time you have the cover off, look back at the pinion gear. Usually a single chip on the pinion gear will cause the ring gear teeth to have multiple chips that look the same as one another. If you don't hear noise and there wasn't a lot of metal, I wouldn't think it would leave you stranded, but keep an eye on it.
Click to expand...
Ok thank you. I haven't heard any noise before the new cover. And driving around today with new oil I haven't heard anything either.

Sent from my LG-H900 using WAYALIFE mobile app
 
10abadilla/jk

10abadilla/jk

New member
I've seen a thread on here about towing with you jeep. And I've had a lot of people ask me if it's possible. Or when they see me towing they say "I didn't know a jeep can tow" well hey it can I did it today. The longest tow I have done. 500 miles. Not a issue in the world.....yet..... In all actuality the jeep did amazing and I couldn't be more happy with the performance. 20170114_085703_HDR.jpg 20170114_085725.jpg

Sent from my LG-H900 using WAYALIFE mobile app
 
10abadilla/jk

10abadilla/jk

New member
AFE exhaust.
20170125_180354.jpg
20170125_180500.jpg
Before.
20170125_180522_HDR.jpg
After.
20170125_183102_HDR.jpg
20170125_183110_HDR.jpg
20170125_183129.jpg
Easy install. It sounds pretty good. Not as loud as I thought it would be which I am glad. Looks and felt very well built.
And a lot more clearance. I'm very happy with it so far. Lets see how it settles in.

Sent from my LG-H900 using WAYALIFE mobile app
 
10abadilla/jk

10abadilla/jk

New member
Thank you to Frydaddy for the information. As soon as I took this little yellow plug off of the vent barb I heard a huge release of air pressure. 20170203_120500.jpg
I extended the vent tube.
20170203_120445_HDR.jpg 20170203_120439_HDR.jpg
And thank you to all who helped as well.

Sent from my LG-H900 using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom