Stock slider hardware

catahoula

catahoula

Caught the Bug
Hey Chilidawg!

I found something on the vast internet on those hardware items.

"For the 2012 and newer JK's you need the following hardware when you install either OEM rubi rock rails of OEM side steps:


1) 8mm 1.25 pitch 30mm length Grade 9 hardened hex head bolts
(you need 4 of these for the 2dr) Also need washers/lock washers

2) 6mm x 1.0 pitch Nylock nuts
(you need 8 of these for the 2dr.) Also need washers

Note: With 2012 and newer JK's you do not use "U-nuts". They are not required.
Also, 30mm length as mentioned above is just a little less then 1.25 inches in length."

(4) M8x1.25x30mm body bolts
(2) M8x1.25 u-nuts
(8) M6x1.0 washered nuts
 
Last edited:
ChiliDawg

ChiliDawg

New member
catahoula said:
Hey Chilidawg!

I found something on the vast internet on those hardware items.

"For the 2012 and newer JK's you need the following hardware when you install either OEM rubi rock rails of OEM side steps:


1) 8mm 1.25 pitch 30mm length Grade 9 hardened hex head bolts
(you need 4 of these for the 2dr) Also need washers/lock washers

2) 6mm x 1.0 pitch Nylock nuts
(you need 8 of these for the 2dr.) Also need washers

Note: With 2012 and newer JK's you do not use "U-nuts". They are not required.
Also, 30mm length as mentioned above is just a little less then 1.25 inches in length."

(4) M8x1.25x30mm body bolts
(2) M8x1.25 u-nuts
(8) M6x1.0 washered nuts
Click to expand...

Thanks a bunch man! Exactly the info I needed.


Sent from my iPhone using WAYALIFE mobile app
 
benatc1

benatc1

Hooked
glad you got the info you needed, still cant find those damn bolts, i have a ton of extra bolts laying around but not the ones you need
 
ChiliDawg

ChiliDawg

New member
benatc1 said:
glad you got the info you needed, still cant find those damn bolts, i have a ton of extra bolts laying around but not the ones you need
Click to expand...

No worries man, sounds like it's standard hardware. I'll get the ones you gave me back in case you come across something you needed them for [emoji1]


Sent from my iPhone using WAYALIFE mobile app
 
catahoula

catahoula

Caught the Bug
Hey Dawg,

I am taking my bolts off my step and noticing they are not the size that was stated. I am finding the large bolts are 13mm and 25.4 mm long from washer or i" and the small nuts are 10mm....sorry. Now these are off of my steps. The same small nuts fit both. I would prefer my large bolts to have bigger washers, but will fit.
 
Last edited:
You must log in or register to reply here.
Top Bottom