Factory jk 44 Studs to long for 1-1/4" spacers

Journeyman

Journeyman

New member
What's everybody's thoughts on cutting the factory wheel studs so they don't stick out beyond the spacers. I literally need to only take off an 1/8" so the wheels sit flush against the spacer.


Sent from my iPhone using WAYALIFE mobile app
 
wayoflife

wayoflife

Administrator
Staff member
You can grind your studs down but it really is better to just get 1.5" spacers. At least, in my opinion.
 
Journeyman

Journeyman

New member
Yea I figured as much. If I did, it would be a temporary solution. I was just hoping to not spend another 100$ on spacers when I'd be ditching them soon anyways.


Sent from my iPhone using WAYALIFE mobile app
 
Ddays

Ddays

Hooked
WJCO said:
His OEM studs are sticking out .125 past the spacer so the wheel won't fit flat.
Click to expand...

Yeah, I got that - I was going the other direction that the extra 1/4" on the spacers shouldn't matter.

Journeyman said:
If I was ordering new yes I'd just order 1 1/2" but I already had the 1 1/4" sitting in the shop. I needed them to clear the new 37-13.5's
Sent from my iPhone using WAYALIFE mobile app
Click to expand...

Makes sense - didn't realize you already had them. I use 1-1/2" to clear my 13.50's as well.
 
You must log in or register to reply here.
Top Bottom