Random Photos

[JKBANDIT55]

If these flex joints go out soon I will burn my jeep down instead of replacing them again.

Got a teraflex 3" flex arm. 10frank9 wants me to put a build thread up but we will see. lol

Now I need to get a few hours of sleep before I head back to the garage at 6AM to get it finished.

I feel your pain. 3" should be perfect! I had to throw on 1" spacers to add to my 2.5" lift to clear these damn 35s better without rubbing. Rides better now.

[OverlanderJK]

I recommend a second set of hands. It's a pain by yourself.

ImageUploadedByWAYALIFE1362508265.386319.jpg

[JAGS]

I recommend a second set of hands. It's a pain by yourself.

ImageUploadedByWAYALIFE1362508265.386319.jpg

You could have text me!

[Cpfiremn]

1951 studabacker and 1971 Lincoln mark III. I detailed both of these today for a customer ImageUploadedByWAYALIFE1362538943.851581.jpgImageUploadedByWAYALIFE1362538961.050010.jpg

[JKRay]

I recommend a second set of hands. It's a pain by yourself.

ImageUploadedByWAYALIFE1362508265.386319.jpg

Wish I lived closer I would of helped you. Wish you luck on getting it on fast.

[MobyJR]

I just doodled this while on BDE staff duty... God I'm bored...ImageUploadedByWAYALIFE1362546897.639024.jpg

[JKBANDIT55]

I recommend a second set of hands. It's a pain by yourself.

<img src="http://wayalife.com/attachment.php?attachmentid=18435"/>

Lol ya it is. I had to use a crow bar to get those suckers in. I also took the jack out and let the axle sit on a 2x4 got about 1" more droop that way. Good luck man!

[OverlanderJK]

Lol ya it is. I had to use a crow bar to get those suckers in. I also took the jack out and let the axle sit on a 2x4 got about 1" more droop that way. Good luck man!

The coils were the easiest part of the whole thing.

[JKBANDIT55]

The coils were the easiest part of the whole thing.

Lol. What was the hard part? It just look like in that pic the axel wasn't low enough to get the coil on.

Glad at least some parts were easy!

[OverlanderJK]

Lol ya it is. I had to use a crow bar to get those suckers in. I also took the jack out and let the axle sit on a 2x4 got about 1" more droop that way. Good luck man!

Lol. What was the hard part? It just look like in that pic the axel wasn't low enough to get the coil on.

Glad at least some parts were easy!

The coil was on in that picture. The control arms were the hardest part. I messed up and didn't do it in the right steps so it made it way harder. The rear should go well though.