What size lift should I get with 31s I was thinking 2 inch lift and trimming the fenders I know someone who does fan work and can trim them real well and didn't know if 2 inches would be to small or should I go bigger?
Welcome to the WAYALIFE.com : More than just a Jeep - It's a way of life!.
Results 1 to 10 of 11
Thread: Lift size
-
02-21-2013, 09:13 PM #1Fresh Catch
- Join Date
- Feb 2013
- Location
- Blackwood
- Posts
- 24
Lift size
-
02-21-2013, 09:16 PM #2Nothing but a Thing
- Join Date
- Apr 2012
- Location
- Dayton OH, Orange County CA
- Posts
- 1,530
Re: Lift size
Do u have a jk? Because they have 32's from the factory! Nothing needed to go down a size
Sent from a migrant connectivity device2013 Dune JKU Rubicon <-- Build Thread
Installed: 35"Nitto Muds, LOD Sliders, DynoMax Comp Exhaust, EVO ProTek Skids, Fender Trim, EVO 1/4 Pounder and stinger, Warn 9.5ti, EVO C-Gussets, 1.5" Spidertrax Spacers, AEV Procal
Needs Installed: Rock Krawler Front Lower CA's, EVO F&R Bolt-on King Coilovers, JKS Front Track Bar, OR-Fab Jerry Can Tire Carrier
Looking to Buy:Drag Link Flip, 1350 Front DS, Rubicon front axle shafts, Sport Cage, Long Arm System, on-board air, Hydro steering
-
02-21-2013, 09:18 PM #3Nothing but a Thing
- Join Date
- Apr 2012
- Location
- Dayton OH, Orange County CA
- Posts
- 1,530
Re: Lift size
Disregard...im an idiot...u posted in the other section
Sent from a migrant connectivity device2013 Dune JKU Rubicon <-- Build Thread
Installed: 35"Nitto Muds, LOD Sliders, DynoMax Comp Exhaust, EVO ProTek Skids, Fender Trim, EVO 1/4 Pounder and stinger, Warn 9.5ti, EVO C-Gussets, 1.5" Spidertrax Spacers, AEV Procal
Needs Installed: Rock Krawler Front Lower CA's, EVO F&R Bolt-on King Coilovers, JKS Front Track Bar, OR-Fab Jerry Can Tire Carrier
Looking to Buy:Drag Link Flip, 1350 Front DS, Rubicon front axle shafts, Sport Cage, Long Arm System, on-board air, Hydro steering
-
02-21-2013, 09:19 PM #4Fresh Catch
- Join Date
- Feb 2013
- Location
- Blackwood
- Posts
- 24
Lift size
Nah I have an xj and lol
-
02-22-2013, 01:42 PM #5Hooked
- Join Date
- Mar 2012
- Location
- Sac, CA
- Posts
- 152
you'll be good at 2" and 31s with a little trimming. the tire might rub a bit on the lower control arms when turning with stock wheels and back spacing but overall no big deal
Built up WJ with rubicon stickers just trying to fit in
-
02-22-2013, 02:42 PM #6Been Around the Block
- Join Date
- Sep 2012
- Location
- Oro Valley, AZ
- Posts
- 251
Lift size
I had a 3" lift with 31s on my old XJ...no trimming needed and I thought it looked great.
-
02-23-2013, 04:08 AM #7Caught the Bug
- Join Date
- Nov 2012
- Location
- Los Gatos CA
- Posts
- 67
2.5" will work for 31/10.50R15 on stock wheels. may have problems with different offset.
-
02-23-2013, 04:13 AM #8Fresh Catch
- Join Date
- Oct 2012
- Location
- Manassas, VA
- Posts
- 40
2" lift should be fine... for shocks, find somebody that has a set of JK Rubicon take-offs! They are a perfect fit on an XJ with a couple inches of lift!!!
-
03-01-2013, 02:17 AM #9Fresh Catch
- Join Date
- Feb 2013
- Location
- Blackwood
- Posts
- 24
Lift size
Ok cool thanks guys
-
03-13-2013, 04:01 PM #10Caught the Bug
- Join Date
- Mar 2013
- Location
- Green Bay, CO
- Posts
- 65
Lift size
With the RE 3.5 superflex and trimmed fenders I ran 33s with no issues. ImageUploadedByWAYALIFE1363190338.210779.jpg
- Kirk
'09 Rubicon 2 door 6-speed Jeep Green
Done: 2.5" Teraflex BB,LoD Shorty Rear w/Tire Carrier, LoD Sliders, Truck-lites, IPF 968s, EVO 44 Mags & C2 gussets, Cobra CB, plus a few other do-dads.
Waiting: Delta lug nut LED 3rd brake lights, Rigid Dually Floods, Poison Spyder Bombshell dif covers
Wanted: 35" BFG KM2s, LoD Shorty Stinger Front bumper, Full EVO skids, more Rigid LED lights, Teraflex 3.5" LCG Long arm lift...Later, EVO Coilovers.
Reply With Quote
Posting Permissions
Powered by vBulletin® Version 4.2.0
Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
All times are GMT. The time now is 03:24 AM.
vBulletin 4.0 skin by CompleteVB
