Any ideas?

[Chris608]

I just installed a JKS 3"lift on my 2023 2dr Wrangler Rubicon, and the adjustable lower control arms don't have a stud for the brake bracket Zip ties, Duct Tape?

 

[kevman65]

Zip ties, or carefully pry the bracket off and go without.

If you want to really get creative, drill and tap the arm for a bolt.

 

[Chris608]

Zip ties, or carefully pry the bracket off and go without.

If you want to really get creative, drill and tap the arm for a bolt.

Thanks!

 

[WJCO]

I was thinking drill and tap too. That would be the cleanest. Zip tie would be the quickest though.

 

[Chris608]

Thanks!

 

[kevman65]

Personally, when I install the lift on the JT I'm going to pry them off. One less thing to rattle or get hung up on something.

 

[wayoflife]

Zip ties will work, I’ve done that before. But what I prefer and have done for my current jeeps is to score the bracket at the hose with a cutoff wheel and then bend it back and forth with vice grips until it breaks off. There will still be a bit of bracket on the hose but it’s no big deal.

 

[Andy5160]

I carefully cut the bracket off completely following the hose.

 

[jeeeep]

could get something like this

https://www.mcmaster.com/products/s...mount-clamping-hangers-8/?s=steel-pipe-clamps