The build of Big Red (Knuckles)

Took my old winch cable off knuckles today. Now just need to find an empty parking lot big enough to spool the new one on.
ImageUploadedByWAYALIFE1458598742.731264.jpg.
ImageUploadedByWAYALIFE1458598752.419113.jpg.
 
Finally got around to replacing my stock door hinges with the TMR ones. The stock ones were JUNK and very hard to get out even with the tool and a hammer. Doors come off and go on much easier now!

Before (ignore the rusty sliders lol)
ImageUploadedByWAYALIFE1458675473.974883.jpg.
Stock compared to TMR liner
ImageUploadedByWAYALIFE1458675496.316580.jpg.
After
ImageUploadedByWAYALIFE1458675509.054966.jpg.
 
Finally got around to replacing my stock door hinges with the TMR ones. The stock ones were JUNK and very hard to get out even with the tool and a hammer. Doors come off and go on much easier now!

Before (ignore the rusty sliders lol)
View attachment 194163.
Stock compared to TMR liner
View attachment 194164.
After
View attachment 194165.

Been wanting to do this for a couple of years, but haven't wanted to spend the coin on such a simple product. Now that you have - was it worth it?
 
Been wanting to do this for a couple of years, but haven't wanted to spend the coin on such a simple product. Now that you have - was it worth it?

It is expensive for such a simple product but it's worth it. My doors were officially impossible to take off this spring. It took me longer to take them off than it did to install the new liners.
 
Spooled my new winch cable on finally. Much better than the rusty ass one I had before
ImageUploadedByWAYALIFE1458757539.658241.jpg.

Also when at the scrap yard to get rid of my old cable I found out knuckles weights 5,040lbs w/o doors, half a tank of gas, and with me in him.
 
Top Bottom