Steel weld on beadlocks

Dark_Star

Member

• Aug 26, 2013

• #1

I know of a set of steel wheels with weld on beadlocks that are brand new. I m wondering if anyone on here has any experience with this type of setup, and would share their experience the good the bad…etc.

 

Rollincoal420

New member

• Aug 26, 2013

• #2

I made a set. They work just fine. Alittle on the heavy side but most steel beadlocks are. There is nothing wrong with diy beadlocks. Ran 6psi on 35's, never once lost a bead

Sent from my SCH-I545 using Tapatalk 2

 

cozdude

Guy with a Red 2-Door

• Aug 26, 2013

• #3

Oldman did this to his TJ. if you go to his build thread he has the website he got them from and they turned out really good! im curious how they did when he did the Rubicon run

 

Dark_Star

Member

• Aug 26, 2013

• #4

Thx for the responses! Do these Guys run them on the street as well or are their jeeps strictly trail rigs?

 

Rollincoal420

New member

• Aug 26, 2013

• #5

I ran mine on the street for a bit. They will hold just fine as long as you got the bolts right enough and non have backed out. The big issues come from the DOT, but with all the simulated beadlocks on the market, and most cops not knowing the difference, you'll probably b ok

Sent from my SCH-I545 using Tapatalk 2