PDA

View Full Version : 2 Bolt recovery point



rox-n-mud
09-22-2013, 12:40 AM
Does anyone know who makes this?

50012




Sent from my eyephone while using my eyephone

Tackerdown
09-22-2013, 02:07 AM
They look kinda roughor cheep.

Sent from my SPH-L720

JeepJKpwr
09-22-2013, 02:14 AM
Looks like cheap China pot metal

rox-n-mud
09-22-2013, 03:46 AM
Looks like cheap China pot metal

It's been sprayed with a primer.


Sent from my eyephone while using my eyephone

rox-n-mud
09-22-2013, 04:09 AM
Does anyone know a forum member that could make these. Or a vendor that sells them.

50035




Sent from my eyephone while using my eyephone

JAGS
09-22-2013, 05:00 AM
Looks like cheap China pot metal

Yup!


It's been sprayed with a primer.


How do you know? Since ur trying to find them?

Brendon
09-22-2013, 05:20 AM
Can I ask where you would use that? That pick point is impractical, from an engineering standpoint the material at the base should be the same thickness as the material at the pick, plus that shackle hole is to close to the edge, as an example, if you had material 1/2" thick, you would want the inside edge of your hole at least a 1/2" away from the outer edge.

Army_Vet
09-22-2013, 10:11 AM
google bolt on d-ring mounts, you will find many... I also will say that I wouldn't use the ones you show in the pic.

There is just not enough there. Just one mans opinion.

GCM 2
09-22-2013, 03:01 PM
I ran the TJ version of these from GenRight, these are for a JK and are a much better option than what you are looking at.

http://www.genright.com/ProductInfo.aspx?productid=BKT8250#.Uj8FqWt5mSM


50078

piginajeep
09-22-2013, 04:20 PM
The picture you posted looks like a flat tow mount.


Here's our JK mountshttp://offroadevolution.com/store/proddetail.php?prod=EVO-DRINGS

http://offroadevolution.com/store/prodimages/EVO-DRINGS_medium.jpg

bl17z90
09-22-2013, 05:56 PM
The picture you posted looks like a flat tow mount.


Here's our JK mountshttp://offroadevolution.com/store/proddetail.php?prod=EVO-DRINGS

http://offroadevolution.com/store/prodimages/EVO-DRINGS_medium.jpg

Where would you mount this? Could they be mounted to the stock bumpers? Obviously not the rear since it's an empty shell

piginajeep
09-22-2013, 06:13 PM
Where would you mount this? Could they be mounted to the stock bumpers? Obviously not the rear since it's an empty shell

This is the front frame mount, used with our 1/4 pounder bumper. The only way to make it work with the factory bumper is to remove the plastic shell leaving the stamped steel frame. I don't think it would look very nice

bl17z90
09-22-2013, 06:30 PM
This is the front frame mount, used with our 1/4 pounder bumper. The only way to make it work with the factory bumper is to remove the plastic shell leaving the stamped steel frame. I don't think it would look very nice

Yeah i have seen a guy who runs with just the steel...pretty dumb looking

David1tontj
09-22-2013, 06:42 PM
Where would you mount this? Could they be mounted to the stock bumpers? Obviously not the rear since it's an empty shell

Apparently you can mount things wherever you want! Check out this idiot! Mounted his tow bar to the thin sheet metal bumper. Looks like he's gonna be trying out his safety chains soon!! Check out how the steel is tearing!501185011950120


05 Tj, long arm, one ton, lockers, winches, 39.5" Iroks

Tackerdown
09-22-2013, 07:28 PM
Apparently you can mount things wherever you want! Check out this idiot! Mounted his tow bar to the thin sheet metal bumper. Looks like he's gonna be trying out his safety chains soon!! Check out how the steel is tearing!501185011950120


05 Tj, long arm, one ton, lockers, winches, 39.5" Iroks
Thats going to get someone killed


Sent from my SPH-L720

Tackerdown
09-22-2013, 07:29 PM
It's been sprayed with a primer.


Sent from my eyephone while using my eyephone

That would explain it

Sent from my SPH-L720

GCM 2
09-22-2013, 10:10 PM
The picture you posted looks like a flat tow mount.....

You are correct, I posted the wrong part :blush: I should have known to just support my friends at ORE with a screen capture and link to your parts! Thanks for posting the correct piece of recovery kit brother :rock:

JKbrick
09-22-2013, 11:02 PM
I vote tow bar part too

LeJerk
09-23-2013, 05:11 AM
The EVO part looks twice as strong at half the price.