PDA

View Full Version : Spidertrax



Firewrangler
12-13-2013, 12:29 AM
Wheel spacers just came. Anything in particular I need to know about putting them on? About to go do it. Just don't want any surprises.

cozdude
12-13-2013, 12:44 AM
Use red loctite


Sent from my iPhone

BlackRockBurner
12-13-2013, 12:44 AM
Remove the lock washers on the studs. Use a torque wrench & LocTite. Have someone push the brake pedal when you do the fronts. Drive around a bit then recheck the torque but minus ~ 5lbs so you don't break the glue. Enjoy the stance.

olram30
12-13-2013, 01:15 AM
write up if needed..
http://wayalife.com/showthread.php?3927-Spidertrax-Wheel-Spacers-Installation-Write-Up

hillybilly
12-13-2013, 01:20 AM
Did all of the above too. I've heard of them seizing to the rotors and becoming a real bear to break loose. So I put some anti-seize on the mating surfaces just in case.

Firewrangler
12-13-2013, 02:00 AM
Well, I'm done. 1.5" just doesn't look like enough. Looks good on the drivers side! Guess I need to get an adjustable track bar so I can center everything up.

dahreno
12-13-2013, 02:18 AM
Hey , 1.5 looks pretty big to me !

Beyrgut
12-13-2013, 02:20 AM
Hey , 1.5 looks pretty big to me !

That's NOT what she said.:cheesy:

dahreno
12-13-2013, 05:36 AM
I know ,she must be blind !

Brankz
12-13-2013, 05:44 AM
That's NOT what she said.:cheesy:

Lmao!!...........

Tackerdown
12-13-2013, 05:47 AM
I hope he isn't still trying to figure this install out.:confused:

Sent from my SPH-L720 using WAYALIFE mobile app

bl17z90
12-13-2013, 10:06 AM
That's NOT what she said.:cheesy:

Most men won't complain about an extra inch and a half.


Sent from my phone?

PilotJK
12-13-2013, 03:42 PM
Buy extra loctite and re-torque as per instructions. I suggest to check the torque periodically. In the past mine loosen...


Sent from my iPhone using WAYALIFE mobile app