Spidertrax

Firewrangler

New member
Wheel spacers just came. Anything in particular I need to know about putting them on? About to go do it. Just don't want any surprises.
 

BlackRockBurner

New member
Remove the lock washers on the studs. Use a torque wrench & LocTite. Have someone push the brake pedal when you do the fronts. Drive around a bit then recheck the torque but minus ~ 5lbs so you don't break the glue. Enjoy the stance.
 

hillybilly

New member
Did all of the above too. I've heard of them seizing to the rotors and becoming a real bear to break loose. So I put some anti-seize on the mating surfaces just in case.
 

Firewrangler

New member
Well, I'm done. 1.5" just doesn't look like enough. Looks good on the drivers side! Guess I need to get an adjustable track bar so I can center everything up.
 

PilotJK

Member
Buy extra loctite and re-torque as per instructions. I suggest to check the torque periodically. In the past mine loosen...


Sent from my iPhone using WAYALIFE mobile app
 
Top Bottom