Leveling My JK

07streetbobrider

New member

• Jan 13, 2014

• #1

I read a review (Amazon I think) and the guy said he installed a 3/4" spacer on the front of his JK with no winch and stock bumper and he said it still had a slight rake in it and wished it was a little higher. Anyone that installed a 1" spacer on a stock JK, did it level it out? I estimate my new bumper and winch will drop the front 3/4" so I'm thinking a 1-3/4" to 2" spacer will level out my jeep with winch/bumper installed.

 

pvanweelden

New member

• Jan 13, 2014

• #2

I did a 2" evo plush coil on the front with a winch and bumper and now it is level. I was indeed about an inch lower than stock after adding winch/bumper, so the 2" coil gave me an inch over stock height.

 

07streetbobrider

New member

• Jan 13, 2014

• #3

Thanks.. 2" is what I was leaning towards. I can always raise the rear a little if a bit too high.

 

dubdub07

New member

• Jan 13, 2014

• #4

You guys are talking a new front coils, right? I think just a 2" spacer is a lot of spacer.

 

pvanweelden

New member

• Jan 13, 2014

• #5

^ yes raising front 2"

if you get the evo 1095 leveling kit, it comes with a 2" plush coil for the front, and a 3/4" spacer for the rear.