I've had my 3" Enforced kit for a couple of months or so now and I like it. The stance and height is really nice and the ride is pretty sweet. However, my rear axle is off center by 1/2" toward driver side. I put my Daystar rear spacer back in to even the height and to see if it would help center the axle at all and no dice. Height is nice and even but still off center. I know 1/2" isn't much but without any extra load I don't think my rig should sit that way. Is there a different rear track bar bracket for the 3" lift vs 4" and maybe I have the wrong one? I bought a JKS adjustable track bar but it doesn't adjust any shorter than a stock so that won't work.
On another note, not sure if this should be a separate issue, but I have a crazy pull driver side. Its doesn't appear that anything is bent but my thrust angle is slightly off. My LCAs are the exact same length and again, nothing is bent or broke that I have been able to find. I know these suspensions aren't the most precise but I'm just in the mindset of if nothing is broke they everything should be where is needs to be. Any thoughts?
The Force will be with you.... always
On another note, not sure if this should be a separate issue, but I have a crazy pull driver side. Its doesn't appear that anything is bent but my thrust angle is slightly off. My LCAs are the exact same length and again, nothing is bent or broke that I have been able to find. I know these suspensions aren't the most precise but I'm just in the mindset of if nothing is broke they everything should be where is needs to be. Any thoughts?
The Force will be with you.... always