evo rear corner rock skins

texjeeper

texjeeper

New member
Hello everyone just had a quick question hopefully someone can answer it for me. What size drill bit should i use for the nutserts that come with the rock corners? I received my rock skins but no instructions and i can't seem to find this info any where and luck hearing from off road evolution.
 
Sharkey

Sharkey

Word Ninja
I think it might be 29/64. Confirm though before you do it because it's been a while since I've done these.
 
olram30

olram30

Not That Kind of Engineer
I'd do a pilot hole first through the skins with a smaller bit, then I think they use 3/8. Do the center ones first by the door then work your way front or back. Have a friend help push them while you drill the pilot hole. Astro nutsert tool is worth the 60 bucks also.
 
olram30

olram30

Not That Kind of Engineer
Just re read the title. For rear corners bunch of clamps and ratchet strap to get them into position.
 
texjeeper

texjeeper

New member
Thx for the info guys I can finally get started.

Sent from my SAMSUNG-SGH-I337 using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom