SaddleTramp
Member
I will have the following parts for sale and pickup at Off Road Evolution in Fullerton within the next couple of months. I would prefer not to ship these items.
FRONT and REAR 2014 Rubicon Dana 44 Axles, 5:13 gears: Prefer to sell as a set (both) together, axles have approximately 10K miles on them with 90% highway miles. EVO gussets and gears were installed at Off Road Evolution in December prior to the 37's being installed at 700 miles. Includes stock shafts, Dynatrac differential covers, front and rear stock electronic lockers both work, yokes included are for 1350 driveshafts and the rear axle has custom EVO high-clearance coilover and long arm brackets welded in place. Front will include EVO drag link flip kit but will not include a tie rod, a heavy duty Synergy tie rod can be purchased below with included PSC hydro assist welded tabs. Front track bar bracket also has PSC hydro cylinder tabs welded on. These axles have not been abused and rear flanges were recently checked with no runout. Brakes pads are 80%+. FRONT IS SOLD TO JKRUISER BUT REAR IS STILL AVAILABLE FOR $1000 OBO
EVO King Front and Rear Bolt-On Coilovers: These have approximately 9500 miles on them, 90% highway miles. Front are 250/250, Rears are 250/250 but I will include the original top 200# springs too so you can adjust to your preference/weight/ride height. These will include all brackets/parts that are removable from my current setup but will not include the rear rockstars (they are custom welded to the above axle,
) but Drew was kind enough to assure me that any specific brackets and accessories needed can be procured through Off Road Evolution as needed separately for your installation needs. The AGM sliders pictured are not included but I have (4) brand new King sliders that I will include with these. SOLD TO NOROAD
ATX Slabs: Five (5), 17X9", 5X5 bolt pattern, ATX slabs, black powdercoated rings (rings have some rock rash but that will give instant bolt-on mall crawlin/street cred), center caps included, installed new in December at Off Road Evolution. SOLD TO PVANWEELDEN
King Front Hydraulic Bump Stops: (2) front King Air Bumps, 2.5" travel w/brackets. $350. SOLD TO MTG
Synergy/Poly Performance Chromoly JK Tie Rod: Dana 44 compatible, currently has custom Off Road Evolution PSC Hydro assist cylinder tabs welded on but these could be cut/removed for your application. SOLD TO JKRUISER
PSC Hydro Assist Cylinder: **Cylinder only, Dana 44/ProRock 44 version/length, 1.75" X 6.75", steering cylinder only. $100 OBO. SOLD TO MTG
FRONT and REAR 2014 Rubicon Dana 44 Axles, 5:13 gears: Prefer to sell as a set (both) together, axles have approximately 10K miles on them with 90% highway miles. EVO gussets and gears were installed at Off Road Evolution in December prior to the 37's being installed at 700 miles. Includes stock shafts, Dynatrac differential covers, front and rear stock electronic lockers both work, yokes included are for 1350 driveshafts and the rear axle has custom EVO high-clearance coilover and long arm brackets welded in place. Front will include EVO drag link flip kit but will not include a tie rod, a heavy duty Synergy tie rod can be purchased below with included PSC hydro assist welded tabs. Front track bar bracket also has PSC hydro cylinder tabs welded on. These axles have not been abused and rear flanges were recently checked with no runout. Brakes pads are 80%+. FRONT IS SOLD TO JKRUISER BUT REAR IS STILL AVAILABLE FOR $1000 OBO
EVO King Front and Rear Bolt-On Coilovers: These have approximately 9500 miles on them, 90% highway miles. Front are 250/250, Rears are 250/250 but I will include the original top 200# springs too so you can adjust to your preference/weight/ride height. These will include all brackets/parts that are removable from my current setup but will not include the rear rockstars (they are custom welded to the above axle,
) but Drew was kind enough to assure me that any specific brackets and accessories needed can be procured through Off Road Evolution as needed separately for your installation needs. The AGM sliders pictured are not included but I have (4) brand new King sliders that I will include with these. SOLD TO NOROAD
ATX Slabs: Five (5), 17X9", 5X5 bolt pattern, ATX slabs, black powdercoated rings (rings have some rock rash but that will give instant bolt-on mall crawlin/street cred), center caps included, installed new in December at Off Road Evolution. SOLD TO PVANWEELDEN
King Front Hydraulic Bump Stops: (2) front King Air Bumps, 2.5" travel w/brackets. $350. SOLD TO MTG
Synergy/Poly Performance Chromoly JK Tie Rod: Dana 44 compatible, currently has custom Off Road Evolution PSC Hydro assist cylinder tabs welded on but these could be cut/removed for your application. SOLD TO JKRUISER
PSC Hydro Assist Cylinder: **Cylinder only, Dana 44/ProRock 44 version/length, 1.75" X 6.75", steering cylinder only. $100 OBO. SOLD TO MTG
Last edited:
