PDA

View Full Version : silversurfer575's build



silversurfer575
08-13-2014, 12:24 AM
My currently built Jeep:

Bright Silver, 2012 JK 2 door auto
OEM full and half doors
Hard and soft tops (factory and trek top NX)
bimini (2007 version that tucks into the door surrounds)
deck cover
Safari Gear netting
Dirty Dog sun shades
PSC side armor
LoD Side rails
LoD signature series front stubby bumper with bull bar
EVO HD front D ring mounts (heavier duty than the ones that came with the LoD)
PIAA LED fogs
Rigid D2s on windshield pillars
PSC license plate delete plug
ORO LED license plate bracket
OEM trailer hitch and wiring
Marathon Super Hides seat covers
Warn Zeon 10k winch with synthetic rope and safety thimble
AEV rear tire carrier and bumper
4 inch coil/spacer combo lift
Teraflex adj control arms
JKS sector shaft brace
JKS adj front trackbar
FOX ATS steering stabilizer
Synergy Steering stabilizer bracket
EVO rear sway bar links
Bilstein 5100s
Teraflex adj. rear track bar
JKS rear spring seats
EVO rock stars
Advance Adapters HD shift cable
Custom locker bypass circuit
35" Procomp MTs
AEV Procal
RCVs
Reids
Synergy HD balljoints
Black ARB dif covers with Lube Lockers
EVO oil pan skid
EVO transmission and crossmember skid
Synergy HD tie rod
EVO drag link flip
Rockhard sport cage
SPoD
bushwacker flat fenders
JKS quick disconnects
EVO no limits manual sway bar disconnect
Coast 1310 front and rear driveshafts
Synergy sleeves and gussets on front axle (planning to replace with PR44 Unl. soon)
Bushwacker front hood wind deflector
Drake front grille covers
Rugged Ridge Hood Locks
Odyssey battery
Viper alarm

Here is a pix of my Jeep with the above:

http://i788.photobucket.com/albums/yy167/dbabbott/JeepMemorialDay2014_zpsf557de26.jpg (http://s788.photobucket.com/user/dbabbott/media/JeepMemorialDay2014_zpsf557de26.jpg.html)



I want to now do some changes. Im not really satisfied with the suspension.

1. PR44 Unlimited Front Axle
2. EVO adj LA kit
3. EVO Bolt on Coilovers front and rear
4. regear to 4:56 or 4:88
5. King bumpstops
6: armor up the rear corners
7. Upgrade rear axle housing and shafts. Not sure what to do there yet.
8. ARB front and rear

I cannot afford to do all of this at once, so Im trying to figure out how to do this in pieces. I kinda screwed up by getting the RCVs and Reids for my current axle. I originally thought I would be able to use the RCVs and the REIDs with the PR 44. Misinformed, so now Im hoping to recover some of the cost mistake when I sell the current front axle.

Stay tuned!

defCon5
08-13-2014, 12:27 AM
Looks and sounds great so far!


Sent via encrypted smoke signal.

JK_Dave
08-13-2014, 04:26 PM
What's your impression of the JKS sector shaft brace? Hydraulic steering would be a long ways away for me and I'm looking to beef up the stock steering box.

silversurfer575
08-13-2014, 04:48 PM
What's your impression of the JKS sector shaft brace? Hydraulic steering would be a long ways away for me and I'm looking to beef up the stock steering box.

Well, its kinda one of those "install and forget" items. Was easy to do the install. Just have a couple places to do a small weld. I dont notice any performance improvement, and this is one of those "prevention" type of things to do. Pay attention to the brand of components that wont work with this mod.. My JK 2 door rubi has a 4 inch lift. I have the JKS adj trackbar and an EVO drag link flip kit. I also am running the Synergy HD tie rod and the Fox ATS steering stabilizer on top of the tie rod. Ive not seen any interference issues. My guess is the cross shaft is what causes the clearance issues with the other brands of components.

Good luck with your build.

silversurfer575
08-28-2014, 05:15 AM
Wooohooo...making the arrangements to EVO Long Arm my rig! Trying to schedule in the install at Offroad Evolution for last week of Sept. Will update with photos when the event happens!!!

1 step closer to ditching the coils!!!!

DA RUNT
08-28-2014, 05:17 AM
Nice looking rig, that's quite the parts list you have :thumb: