need measurments for trektop brackets!

jmatta33

New member

• Sep 15, 2014

• #1

So I completely forgot to take measurements for the trektop nx brackets before cutting out my factory roll cage. i want to use the top with the new cage, but i need to know the distance from the winshield to the brackets. if someone could measure the distance from both brackets in relation to the edge of the winshield channel i would really appreciate it!


RLTW!!!

 

wayoflife

Administrator

Staff member

• Sep 15, 2014

• #2

Step #10 in this write-up has some measurements but, I gotta tell ya that every Jeep is a bit different. That's why it's important to take the measurement ahead of time.

http://project-jk.com/jeep-jk-write...er-2007-2010-sport-cage-installation-write-up

Hopefully it'll help just the same.

 

jmatta33

New member

• Sep 16, 2014

• #3

wayoflife said:

Step #10 in this write-up has some measurements but, I gotta tell ya that every Jeep is a bit different. That's why it's important to take the measurement ahead of time.

http://project-jk.com/jeep-jk-write...er-2007-2010-sport-cage-installation-write-up

Hopefully it'll help just the same.

Click to expand...

as long as i can get it in the ballpark, i can fit it in from there. this is perfect though, thanks!


RLTW!!!

 

cozdude

Guy with a Red 2-Door

• Sep 16, 2014

• #4

any way you could tack weld the stock frame back in for a bit that way you could get a rough measurment that way?

 

jmatta33

New member

• Sep 16, 2014

• #5

cozdude said:

any way you could tack weld the stock frame back in for a bit that way you could get a rough measurment that way?

Click to expand...

I guess I could. A buddy of mine just got his trektop so worst case I can measure his. tacking the old one back in would be a pita...


RLTW!!!