Clem's Jeep build

Clem319

New member
I have decided to start a build thread since I plan on doing quite a few things. My wife is finally on board and is supportive of the mods after a few trail runs. I sold my BroDozer and I bought a 2013 JKUS, Freedom Edition, used, with a Teraflex budget boost, Fuel rims and 35” Toyo's.
ImageUploadedByWAYALIFE1411054985.042821.jpg

I thought this was a good starting point for me. I wanted the Rubicon but could not justify the extra money when this jeep came with everything I wanted, minus the 4:1 transfer case. I planned on replacing the front axle on whatever jeep I decided on, so it was not an issue to have the Dana 30.

This is the day I bought the Jeep. It was already “de-stickered” with all the Freedom Edition stickers removed. The interior is leather and it has a pretty cool design.
ImageUploadedByWAYALIFE1411053384.042624.jpg

Took it out on a few quick runs to get some poser shots and show the wife. I did a wave awhile back and told everyone I used to have an 88 YJ. I was single when I had that Jeep and my wife never got to see it or ride in it so she really had no idea about the Jeep life. Did a night run on the Miller Trail and determined I needed better and more lights. We do a lot of night runs in Central Cali because it is so hot in the summer.
ImageUploadedByWAYALIFE1411053425.819830.jpg ImageUploadedByWAYALIFE1411053459.821699.jpg ImageUploadedByWAYALIFE1411055043.994295.jpg

I started slow, ordering one or two things at a time to ease into it. My first mod was cutting the Rubi rails so they no longer rubbed. I ordered a pair of Truck-Lites a few days later. Truck-Lites installed, smoked the front turn signals and threw a Wayalife banner on.
ImageUploadedByWAYALIFE1411053499.707053.jpg

I next took advantage of the Poison Spyder sale that Northridge was having and bought a new front bumper. Install took a lot longer than planned due to the front tow hitch on the jeep. The installer of this hitch tried to make work by attaching these metal rods to the nut, but they broke and there was no way to remove the bolt without the nut spinning. I tried numerous methods to get the bolt out but had to resort to grinding the head off of the bolt. There was minimal damage to the hitch so I will probably give this thing away to someone who needs it.
ImageUploadedByWAYALIFE1411055080.589787.jpg ImageUploadedByWAYALIFE1411055099.650874.jpg ImageUploadedByWAYALIFE1411055115.387117.jpg

After the minor set back, I sanded and cleaned the bumper. I applied a clearcoat to the bumper in an attempt to stop it from rusting. I am not sure if it will work but I am really digging the bare metal look. Hope it lasts!
ImageUploadedByWAYALIFE1411055150.734471.jpg

So after a couple beers I gained some liquid courage to cut my color matched fenders. My ultimate plan was to buy a black set and practice, just in case. Well I felt confident enough after reading countless threads on the fender cutting to give it a try (plus the beer, it helped). I taped, measured and measured again.

Bosch metal blade and jigsaw in hand.......... I dive in. They cut extremely easy and it was no big deal. I cut with the liners on. Hit a few hard spots, but nothing too bad. I cleaned the fender liners up with a sawzall and razor blade. I sanded the fender with and hand sander and 220 grit. Overall I am happy with the cut and was the look I wanted. I ran out of daylight and could not get the rear done. They will have to wait for another weekend.
ImageUploadedByWAYALIFE1411055191.594012.jpg ImageUploadedByWAYALIFE1411055216.544648.jpg

This is where I sit at today.
ImageUploadedByWAYALIFE1411055282.862678.jpg ImageUploadedByWAYALIFE1411055296.954283.jpg

I have a lot more parts that need to be installed and a collection is growing in the garage. The only thing stopping me is time. I have to decide between wheeling, family, work and installing. The struggle is real. The wife has stated I need a shop so I get all of my Jeep parts out of the garage. I am for this idea and will probably continue to stack parts so I get a shop one day. Hopefully with A/C.
 

Clem319

New member
Nice ride man. How u liking the budget boost lift

rob_lobster

So far, so good. It's a nice and cheap alternative to get you by until you can get the real thing. I will be taking it off soon and will give it away to a good home so keep a look out 👍

Thanks guys. I love the raw metal look and I'm hoping it will last for awhile and not rust. I put about 4 applications of clear coat on it.
 

Clem319

New member
It's not on the Jeep, but it is for the Jeep. DIY hardtop hoist. 4 eye bolts and 4 motorcycle straps. $30 to make. ImageUploadedByWAYALIFE1411432536.418504.jpg
 

Clem319

New member
Hardtop off for late summer. One man operation with the DIY hoist. View attachment 102924

Spider web shade put on. ImageUploadedByWAYALIFE1412030684.961883.jpg ImageUploadedByWAYALIFE1412030695.179858.jpg

Next came the DirtyDog spider netting. Man was this a pain to put on. I think my dyslexia got the best of me. It said 30 minutes to install, however it took me a good 2 to 3 hours. I did put the sides on backwards the first time so that's my bad. The net is high quality but the install was killer. The directions could have been better. Overall I like the look and it matches the shade perfectly. ImageUploadedByWAYALIFE1412031004.367544.jpg ImageUploadedByWAYALIFE1412031029.224512.jpg
 

Clem319

New member
Besttop under seat lock box installed. Easy installation and provides some security if you have to leave important items in the jeep. ImageUploadedByWAYALIFE1413052050.906566.jpg ImageUploadedByWAYALIFE1413052061.144573.jpg
 

Clem319

New member
Dropped off at the dealer this morning. Going to have the radiator flushed and the correct coolant put in. Thanks to coolant write up I noticed I had the Orange and not the purple! ImageUploadedByWAYALIFE1413212890.764752.jpg
 

Clem319

New member
A friend asked for help cutting his fenders today. I had a free day so I cruised on over and helped. ImageUploadedByWAYALIFE1415670334.930422.jpg

It motivated me to do my rear fenders when I got home.
ImageUploadedByWAYALIFE1415670377.750503.jpg ImageUploadedByWAYALIFE1415670398.417844.jpg

Then put on the door trim because I liked the look. ImageUploadedByWAYALIFE1415670430.360480.jpg ImageUploadedByWAYALIFE1415670444.138123.jpg
 

Clem319

New member
Well I have a pile of Jeep parts with little time to install. ImageUploadedByWAYALIFE1418093887.590286.jpg

I did rattle can the inside of the rear fenders. Much better. ImageUploadedByWAYALIFE1418093928.733406.jpg
 
Top Bottom