MagLite Flashlight Seat Mount Write-Up

wayoflife

Administrator
Staff member
main.php


Because you never know when you're gonna need a little extra light, I like to carry a good MagLite flashlight with me in my JK. Unfortunately, there really aren't a whole lot of convenient places that you can store one without it rolling around while you drive and driving you nuts. And, that's why I decided to secure mine with a mount. Fortunately, MagLite sells a basic wall mounting kit that you can buy for cheap at your local hardware store and, it can be installed in minutes. Here is a quick write-up I did to show you how easy it is to install.

What you'll need:
• MagLite Mount Bracket Kit
• Hand Drill
• Small Metal Drilling Bits
• Center Punch
• Phillips Screwdriver
• Self-Tapping Bolt
• 5/16" Socket
• Ratchet

Here's a shot of the MagLite mounting kit.
main.php


Using one of the MagLite mounting brackets as a template and mark the points where you will need to drill on your driver side seat rail with a center punch.
main.php


Drill the mounting holes into your seat rail as shown. If I recall, I used a 1/16" drill bit.
main.php


To make this install easier, I used a self-tapping screw about the same size as the screws provided to thread the mouting holes. A 5/16" socket was needed for this job.
main.php


Finally, I secured the mounting brackets to the driver side seat rail of my JK using the phillips screws provided.
main.php


And that's all there is to it.
main.php


Please let me know if you have any questions :cool:
 

Attachments

  • Hell'sRevenge11-2012_IMG_0694.jpg
    Hell'sRevenge11-2012_IMG_0694.jpg
    73.4 KB · Views: 6
  • 1-20-13 WOL Run Sidewinder 911a_1d.jpg
    1-20-13 WOL Run Sidewinder 911a_1d.jpg
    116.1 KB · Views: 10
  • pohnpei_sunset.jpg
    pohnpei_sunset.jpg
    45.5 KB · Views: 3
  • Pohnpei 2.jpg
    Pohnpei 2.jpg
    154.4 KB · Views: 3
  • ImageUploadedByWAYALIFE1368461507.090582.jpg
    ImageUploadedByWAYALIFE1368461507.090582.jpg
    73.1 KB · Views: 3
  • ImageUploadedByWAYALIFE1368461561.797222.jpg
    ImageUploadedByWAYALIFE1368461561.797222.jpg
    24.7 KB · Views: 4
  • ImageUploadedByWAYALIFE1368462098.886801.jpg
    ImageUploadedByWAYALIFE1368462098.886801.jpg
    24.3 KB · Views: 5
  • ImageUploadedByWAYALIFE1368462117.027969.jpg
    ImageUploadedByWAYALIFE1368462117.027969.jpg
    33.9 KB · Views: 10
  • 20130203_142220.jpg
    20130203_142220.jpg
    103.9 KB · Views: 4
  • 20130203_143637.jpg
    20130203_143637.jpg
    85.6 KB · Views: 6

210GoldenEagle

New member
Where do you get the brackets? I can't find them ANYWHERE
 

Attachments

  • 240608_10151582214888680_910004216_o.jpg
    240608_10151582214888680_910004216_o.jpg
    154.9 KB · Views: 42
  • IMG_5457.JPG
    IMG_5457.JPG
    153 KB · Views: 24
  • IMG_5460.JPG
    IMG_5460.JPG
    157 KB · Views: 19
  • IMG_5459.JPG
    IMG_5459.JPG
    135.6 KB · Views: 19
  • IMG_5461.JPG
    IMG_5461.JPG
    133.2 KB · Views: 19
  • IMG_5472.JPG
    IMG_5472.JPG
    140.1 KB · Views: 23
  • IMG_6116.JPG
    IMG_6116.JPG
    124.5 KB · Views: 24
  • IMG_6118.JPG
    IMG_6118.JPG
    129.1 KB · Views: 24
  • IMG_6119.JPG
    IMG_6119.JPG
    89.1 KB · Views: 20
  • IMG_6120.JPG
    IMG_6120.JPG
    100 KB · Views: 19
  • IMG_6121.JPG
    IMG_6121.JPG
    122 KB · Views: 21
  • IMG_6125.JPG
    IMG_6125.JPG
    117.8 KB · Views: 21

HornetJK

New member
I picked mine up from Walmart.
 

Attachments

  • DSC00362.jpg
    DSC00362.jpg
    150.4 KB · Views: 8
  • DSC00431.jpg
    DSC00431.jpg
    156.1 KB · Views: 11
  • DSC00440.jpg
    DSC00440.jpg
    213.9 KB · Views: 12
  • DSC00477.jpg
    DSC00477.jpg
    170.1 KB · Views: 17
  • DSC00485.jpg
    DSC00485.jpg
    192.5 KB · Views: 33
  • DSC00490.jpg
    DSC00490.jpg
    207.2 KB · Views: 21
  • DSC00505.jpg
    DSC00505.jpg
    143 KB · Views: 19

blown2tone

New member
Great idea! Thanks
 

Attachments

  • DSC_0339.jpg
    DSC_0339.jpg
    106.3 KB · Views: 12
  • DSC_0334.jpg
    DSC_0334.jpg
    151.1 KB · Views: 11
  • DSC_0332.jpg
    DSC_0332.jpg
    161.8 KB · Views: 15
  • DSC_0330.jpg
    DSC_0330.jpg
    162.8 KB · Views: 17
  • DSC_0321.jpg
    DSC_0321.jpg
    144.1 KB · Views: 15
  • DSC_0311.jpg
    DSC_0311.jpg
    118.6 KB · Views: 12
  • DSC_0310.jpg
    DSC_0310.jpg
    141.8 KB · Views: 14
  • DSC_0346.jpg
    DSC_0346.jpg
    195.1 KB · Views: 10
  • DSC_0349.jpg
    DSC_0349.jpg
    121.2 KB · Views: 10
  • DSC_0391.jpg
    DSC_0391.jpg
    190 KB · Views: 12
  • DSC_0389.jpg
    DSC_0389.jpg
    192.7 KB · Views: 11
  • DSC_0382.jpg
    DSC_0382.jpg
    166.9 KB · Views: 11
  • DSC_0378.jpg
    DSC_0378.jpg
    128 KB · Views: 12
  • DSC_0369.jpg
    DSC_0369.jpg
    196.8 KB · Views: 13
  • DSC_0360.jpg
    DSC_0360.jpg
    157.7 KB · Views: 17
  • DSC_0351.jpg
    DSC_0351.jpg
    123.2 KB · Views: 12

Bnizzle

New member
Could you do the same thing with a 1lb Fire Ext?
 

Attachments

  • IMG_0112.jpg
    IMG_0112.jpg
    124.4 KB · Views: 1
  • image-1271214443.jpg
    image-1271214443.jpg
    92.9 KB · Views: 0
  • image-2352897885.jpg
    image-2352897885.jpg
    85.6 KB · Views: 0

Jeep4me2

New member
Did this one already. It's funny, but everyone I know who has seen it, always comments on what a great idea it is. I always give you guys props!
 

highoctane

Caught the Bug
I used a set of those clips to mount my front license plate to the roller fairlead. Not needing a front tag anymore, I'll have to use them for this.
 

Chicagojk

New member
broken

I did this, but the brackets broke from climbing up and down. The seat collapses and the pressure hit the top bracket and snap!
 

Linebacker

Caught the Bug
South of the Canadian border these plastic Maglite brackets can be found in any hardware store. I've had a couple of them break while taking the light out or putting it back in. I now carry some spares but have found there are no problems when I slide it in or out. Very satisfying! Seriously! Good luck.:yup:
 
Top Bottom