Fender Flare chop with no lift?

tonytony9

tonytony9

New member
Anyone rocking the stock fender flares but have trimmed them to be slim like in this write up: http://project-jk.com/jeep-jk-write-ups/jeep-jk-wrangler-factory-fender-chop

With also the stock bumper chopped to be stubby?

I currently have an 08 wrangler unlimited black with 295/70/17 and stock bumpers. I want to try to chop both my front bumper and also the fenders but I wanna see some people with with something similar to my current setup to see the appearance

Thanks

ImageUploadedByWAYALIFE1418855883.191559.jpg
 
BadApple

BadApple

New member
There are many writeups with pictures already on this subject, search tab is your best friend. Here is a pic though

d60507cb69c9126d3d9066616044b668.jpg
 
olram30

olram30

Not That Kind of Engineer
I had cut fenders on factory suspension and stock rims and tires for a while. I didn't mind how it looked imo.
 

Attachments

  • 1418931398496.jpg
    1418931398496.jpg
    80.3 KB · Views: 213
Clark Collins

Clark Collins

New member
That's 33s and no lift just trimmed fenders.[/QUOTE] I've never remembered to take pictures when my rig looks like that, or worse.
 
xx-LSD-xx

xx-LSD-xx

New member
IMG_2410.jpg
You can reuse the fender liners as long as you trim them.
Highly recommend keeping the front liners as they keep mud and water
away from your motor.
I reused mine and found that a soldering iron worked best and made a clean cut.
Plus i had chopped the front bumper ends as they are plastic and the stock bumper
is well garbage. I have since installed a stubby bumper and a winch. And a few other mods.
Have fun that's why you bought a Jeep.
 
You must log in or register to reply here.
Top Bottom