Right size screw to mount factory fog light to Poison Spyder front bumper?!?!

T

thechrisjones

New member

• Jan 28, 2015

• #1

I'm having a problem with installing my factory fog light in my Poison Spyder bumper. The bumper has pre-drilled holes. I have 2 questions. 1st what size and type screw is needed? To fit the predrilled holes. 2nd there is a 2 or 3 inch gap from the front of the fog light and beginning of the fog light housing. Does the front of the fog light just go right up to the bumper?

 

OscarMike2.0

New member

• Jan 28, 2015

• #2

I used self tapping screws. I dont remember what size but I just went to home depot and found some appropriately sized. As for the fog light, it should be recessed in the bumper and not flush.

 

Rideski

New member

• Jan 29, 2015

• #3

I used zip ties.

 

T

thechrisjones

New member

• Jan 29, 2015

• #4

Rideski said:

I used zip ties.

Click to expand...

Good one. Will you help me install my left lift?

 

Jackal01

New member

• Jan 29, 2015

• #5

The lights are recessed. I used the same screws that were used from the factory but I also have a bunch of self tapping sheet metal screws that would have worked. I dont know the size.

 

SaddleTramp

Member

• Jan 29, 2015

• #6

Jackal01 said:

self tapping sheet metal screws that would have worked. I dont know the size.

Click to expand...

^^^This, mine are also just held in place with 4 sheet metal screws through the factory light buckets.

 

T

thechrisjones

New member

• Feb 4, 2015

• #7

SaddleTramp said:

^^^This, mine are also just held in place with 4 sheet metal screws through the factory light buckets.

Click to expand...

This worked perfect! Thanks

 

thardy

Banned

• Feb 4, 2015

• #8

Glad you got it all worked out. Looks good man.