webejeepin
Member
Just installed a set of KC lights and I'm done less the final wire hook up. There is white wire that to be installed directly to the battery which connects to the switch in the cab that triggers the coil in the relay. Ok...but this means you can turn the lights on without the key in the on position. Hmm.
Looking to hook the white wire to a switched 12v source instead, help avoid me leaving the lights on or some smart a$$ turning them on when doorless in a parking lot.
I looked at the fuse box adjacent to the battery and one could pick up a switched source there but not sure how to route the wire and not violate the weather seal of the fuse box.
Looking for advice and suggestions.
Thanks
Looking to hook the white wire to a switched 12v source instead, help avoid me leaving the lights on or some smart a$$ turning them on when doorless in a parking lot.
I looked at the fuse box adjacent to the battery and one could pick up a switched source there but not sure how to route the wire and not violate the weather seal of the fuse box.
Looking for advice and suggestions.
Thanks