Drag link end issues

toxicwaste29

New member

• Sep 9, 2015

• #1

Hello all again,

I am having issues with me drag link end at the pitman arm side. I have a RK drag link and have had moog ends. The pitman arm end keeps failing and Im about to be on number three within a year since my second is bad again. Am I better off getting it replaced again under their lifetime warranty, getting hd ends that will last longer, or get an entire different drag link in case this is a design issue and they will keep failing? Thanks y'all.

 

olram30

Not That Kind of Engineer

• Sep 10, 2015

• #2

Is this drag link flipped?

 

jeeeep

Hooked

• Sep 10, 2015

• #3

do you have a dropped putman arm?

 

toxicwaste29

New member

• Sep 10, 2015

• #4

Yes the drag link is flipped and no I dont have a dropped pitman arm. It is the old RK design with drag link ends on both ends if that helps any.

 

olram30

Not That Kind of Engineer

• Sep 10, 2015

• #5

Put a factory rhd drag link and stop this madness. Tell rk to shove their inferior parts where the sun don't shine

 

toxicwaste29

New member

• Sep 10, 2015

• #6

Agreed. I started building my jeep before finding this forum and now I have a fraken lift. The ends are moog and not from RK. My drag link is flipped so Im assuming I cant go back to stock. I flipped the drag link and relocated the track bar.