A good PSI??

FuriousDz

New member
Whats a good psi to air down to for 37x13.50 on a NON beadlock 17x9 rim?

Ive been using 15 psi

Thanks
 

wayoflife

Administrator
Staff member
Wow, you like to start early :D

Thanks!
10-12 is ok even without beadlocks?

Only because you are running a narrow enough wheel (in comparison to your tire width) as that will help to hold your bead in place and, only "if needed".
 

MTG

Caught the Bug
Wow, you like to start early :D

Thanks!
10-12 is ok even without beadlocks?

Remember that you'll likely end up lower than what you started when you are done wheeling. If I start at 15, I am usually around 10 at the end of the day. If I start at 12 or 10 I've ended up around 4 or 5.

This is without beadlocks and 37s.
 

FuriousDz

New member
Remember that you'll likely end up lower than what you started when you are done wheeling. If I start at 15, I am usually around 10 at the end of the day. If I start at 12 or 10 I've ended up around 4 or 5.

This is without beadlocks and 37s.

Thanks for the info.

4 or 5 :eek: I wouldnt think you can get that low safely without beadlocks
 

MTG

Caught the Bug
FuriousDz said:
Thanks for the info.

4 or 5 :eek: I wouldnt think you can get that low safely without beadlocks

Agreed. Imagine how surprised I was to see that! That's why I typically just go down to 15. :yup:
 

wayoflife

Administrator
Staff member
A good PSI for stock tires on my 2013 Sport?

Donny

You're pretty good to go with 12-15 psi on anything other than a bead lock, stock tires included. You can go lower but, you will run the risk of rolling a bead.
 

JKAnimal

Caught the Bug
We ran a bunch of Colorado trails in September and 15psi worked good on 17x9 non-beadlock wheels with the stock 32" MudTerrain KM.
 
Top Bottom