A Pillar Rattling Noise

spencerd45

New member

• Nov 7, 2015

• #1

I just picked up a used 2014 JKS with some miles on it. After having it a few weeks, I have noticed the top left corner of the A pillar where the roll bar meets the windshield is making a rattling noise. I took off the trim and tightened all the bolts and the noise is just as bad as before. Anyone else have the same issue or have any ideas how to stop it?

Thanks again,
Spencer

 

toxicwaste29

New member

• Nov 7, 2015

• #2

Could it be the trim rattling against the pillar? Mine any time I go off camber squeaks badly.

 

Renzo1200

Member

• Nov 7, 2015

• #3

Try the torx bolt at the top of the roll bar. Mine always wiggles loose.

 

spencerd45

New member

• Nov 8, 2015

• #4

I thought it could be the plastics making the noise so I removed them and it still rattled. I tightened the bolts and put the plastic trim back on and the noise is exactly the same. Not sure what else to try

 

jeeeep

Hooked

• Nov 8, 2015

• #5

if you have a hardtop, there's a bolt under the drivers side top that holds the back portion of the top down. That bolt would come loose on mine, I put some Teflon tape on it to keep it from working loose and rattling.