2" Lift with 37's

LAJK · Dec 12, 2015

Is there anyone on here running a 2" spring with 37's? I'm considering changing my 4" teraflex spring out for a 2" synergey Spring any thought? I'm looking for a lower Center of gravity and also a better ride Quality.

jorgelrod · Dec 12, 2015

I think you might pull it off if you just mall crawl, the moment you start flexing, you're gonna rip fender flares. Also, if yours is a 2012 and older, you're gonna have to cut the pinch seams in the rear...

OverlanderJK · Dec 12, 2015

You can do it if you run longer bump stops and trim a lot. I would at least do 2.5" lift.

LAJK · Dec 12, 2015

I'm getting a used pair of synergy springs. They are 3" on a 2door but come in at a 2" on a 4 door. I will be installing some poison spyder fenders and bigger bump stops. I plan on using the jeep not much mall crawling going to be happening.

metalic · Dec 12, 2015

I run the RK 2.5, EVO rockstars, 2" bumps front and rear, cut flares on 37's. I netted a lil over 3" and it performs good, I wanted LCG but wouldn't want to run any lower lift

LAJK · Dec 12, 2015

metalic said:
I run the RK 2.5, EVO rockstars, 2" bumps front and rear, cut flares on 37's. I netted a lil over 3" and it performs good, I wanted LCG but wouldn't want to run any lower lift

Metalic do you happen to have any pictures you could post up?

metalic · Dec 12, 2015

Only pics I have on 37's. I was running 35's until a couple months ago and only 1 wheeling trip. I forgot to mention in the rear I had hammered the punch seam to stuff the 40's I ran for a couple days ( street only ) and allowed me to run the 37's without additional bumps. The pic of drivers side is the 40's

2" Lift with 37's

LAJK

Member

jorgelrod

Hooked

OverlanderJK

Resident Smartass

LAJK

Member

metalic

Member

LAJK

Member

metalic

Member

Attachments