Did I screw this up
- Thread starter tdougherty81
- Start date
hinrichs
Caught the Bug
Is that the end of your ds stuck in the stock yoke?
tdougherty81
New member
Yes sir. It won't come out.
piginajeep
The Original Smartass
Get a flat blade between the yoke and that shinny piece. Keep working around the yoke. Might be easier to Jack the back end up so it'll spin where you need it.
Don't forget a BFH
Don't forget a BFH
tdougherty81
New member
Thanks I'll try it now.
tdougherty81
New member
Not much room to get anything in there.
Attachments
piginajeep
The Original Smartass
Just start by smacking it with a rubber mallet. Try to smack that edge out. You'll just be barely hitting it but It'll eventually work its way out
piginajeep
The Original Smartass
It seats down in lip..
tdougherty81
New member
Ok, finally got it out. Ended up re- bolt the front to the transfer case put it in gear until it broke free.
Thanks for the help guys.
tdougherty81
New member
What a pain.
Attachments
Exodus 4x4
New member
Just curios, but why did you pull it off?
tdougherty81
New member
Replacing it with an Adam's rear driveshaft. Did the front awhile back.
tdougherty81
New member
Funny didn't even notice just ended up landing there.