End links for Rubi swaybar

LasVegasJK

New member

• Jan 30, 2016

• #1

I'm going to install a Rubi swaybar on my non rubicon. It's a 2015 JKU Willys with an EVO leveling kit, stock Rubi wheels/tires, JKS Disconnnects, and stock shocks.
My JKS are 1-1/2" longer than stock links, and I will pry run these until I upgrade to an Enforcer.
Since I'm still running stock shocks, is there any concern with flipping the sway bar when the shocks are completely extended?

 

cozdude

Guy with a Red 2-Door

• Jan 30, 2016

• #2

As long as your sway bar is at about 10* above parallel at ride height you should be good

 

LasVegasJK

New member

• Jan 30, 2016

• #3

cozdude said:

As long as your sway bar is at about 10* above parallel at ride height you should be good

Click to expand...

Hmmm, yeah, I'll pry go ahead and get some longer links. ill have to get one of those angle-finder-degree-scale units.

 

OverlanderJK

Resident Smartass

• Jan 30, 2016

• #4

LasVegasJK said:

Hmmm, yeah, I'll pry go ahead and get some longer links. View attachment 185013 ill have to get one of those angle-finder-degree-scale units.

Click to expand...

You can use a tape measure too.

 

LasVegasJK

New member

• Jan 30, 2016

• #5

OverlanderJK said:

You can use a tape measure too.

Click to expand...

Yeah, I could eyeball it a little higher than level and measure.