Jk headlights

Jason12

New member
I need to adjust the heighth on my headlights after lift install. Do I need to pull off the grille to get to them? I seen the screws on outside oh lights r these for adjusting if so which ones do height?
 
I need to adjust the heighth on my headlights after lift install. Do I need to pull off the grille to get to them? I seen the screws on outside oh lights r these for adjusting if so which ones do height?

Nope no need. Its the one on the side( i think)
 

toxicwaste29

New member
When I mine I didn't follow the write up. I measured from the ground up to the center of the headlight. I then moved it back 20 or 25' I can't remember and measured up that far and set the lights to that height
 

Journeyman

New member
Set mine at three feet up to the very top of the spot at a distance of twenty five feet. Find Eddie's write up and follow it. Also make sure your sitting on level ground.
There's also a write up floating around here on horizontal adjustment. A little bit more involved than the vertical adjustments. But still nothing serious that most people should be able to handle.
 
Top Bottom