3" EVO Enforcer sway bar bracket.

Erockhopper

New member
3" EVO Enforcer sway bar bracket.

The driver side sway bar bracket that comes with the enforcer 3 inch lift requires drilling out the spring perch bracket. Somehow I lost the spacer that goes between the extension bracket and the spring perch bracket. Is there any reason that this bracket couldn't be welded on. Looks like plenty of room around the old sway bar bracket to get it to work. Has anyone else done this, or looked into it?
 
Last edited:

Jeepfan30

Member
You would need to fill the gap with something if welding. Maybe just use longer front links and skip the swaybar brackets suppleied in the drag link flip kit. That's just my opinion, I am a minimalist :D

PS, this bracket is on the driver side.
 

Erockhopper

New member
Thanks for pointing out I had the wrong side identified. I wasn't looking to "fill the gap" so to speak. I was thinking of welding the new extended bracket, now bolted up to the factory sway bar bracket. Basically welding the two brackets together.
 
Top Bottom