PR44 Diff Cover Removal

Changing the lube on my PR44. I watched Eddies instructions on this and his tie rod seems to have way more clearance than mine. I don't have a high steer. Do I need to remove the steering stabilizer, drop the tie rod bolt on the driver side and swing the tie rod out to get clearance? Or will the diff cover clear the ring gear? Probably the difficult part would be putting it back on without messing up the RTV. What do you suggest?

you should be able to pull it straight back and rotate it downward towards the center of the jeep. this was the method i used when i had to change mine.

Benito said:

you should be able to pull it straight back and rotate it downward towards the center of the jeep. this was the method i used when i had to change mine.

Click to expand...

Good news! Thanks! On to the messy part!