Traction control probs

So recently I had new rear shafts put in my rear d44. While doing the R&R we found that there was a lot of mud that had gotten into the ebrake and tone ring area. After thorough cleaning and everything was back together I had an abs and traction control problem that led me to replacing the right rear abs sensor. It has now cleared up for the most part. Now while making a slow speed right turn from a stop my traction control light will come on and try to shut the jeep down. Any suggestions on what the problem would be. I will most likely go ahead and replace the drivers side also. Just wanted to get an opinion. Thx
2015 jku

Check the plug itself, if the red tab gets cracked or any part of it gets broken it won't stay connected all the way and cause what you're describing. My traction control and ABS light came on after hitting a bump and from making a sharp turn. Replaced the plug (wire side) and it fixed my issues.

Thx. I will look into that. I did have a little trouble getting the plug to stay connected but was finally able to get the red locking device to push in.


Sent from my iPhone using WAYALIFE mobile app

BertaNation said:

Thx. I will look into that. I did have a little trouble getting the plug to stay connected but was finally able to get the red locking device to push in.


Sent from my iPhone using WAYALIFE mobile app

Click to expand...

make sure none of the pins in the plug got pushed in
i may be thinking wrong but i thought those plugs had pins

BertaNation said:

Thx. I will look into that. I did have a little trouble getting the plug to stay connected but was finally able to get the red locking device to push in.


Sent from my iPhone using WAYALIFE mobile app

Click to expand...

No problem, hopefully it's something easy.