2016 SEMA BREAKING NEWS: NEW Dynatrac ProRock XD60 Standard-Cut Axle

wayoflife

Administrator
Staff member
This is the 2nd of 5 press releases that Cindy and I got an exclusive to here at the 2016 SEMA show and this one is geared to those of you who've been wanting the lightweight and ground clearance of a Dynatrac XD60 rear end but want the strength of a standard cut or low pinion axle. Check it out!

Dynatrac Unveils the Latest ProRock XD60® for Severe-Duty 4x4s Needing Lightweight and High Ground Clearance Rear Axles

20161031173105-5180f7b8.jpg


• All-new Dynatrac ProRock XD60® Standard-Cut Axle provides exclusive, patented, best-in-class ground clearance with extreme durability in a lightweight assembly
• Axle assembly uses 4-inch outside diameter with various wall thickness axle tubes for incredible strength without unnecessary weight
• Standard-cut gears and full-float design with optional 40-spline shafts makes the ProRock XD60 ideal for rear axle use on 4x4 and Jeep vehicles with very large tires
• The Dynatrac ProRock XD60 is 100 percent made in the USA.


Las Vegas – Dynatrac continues to lead the way in high ground clearance, severe-duty axle assemblies for the off-road enthusiast market. The all-new Dynatrac standard-cut, full-float ProRock XD60® is the strongest and lightest axle in its class. This axle is designed specifically for Jeep Wrangler and 4x4 builds using 37 to 40-inch-diameter tires. The ProRock XD60 fills a need between the current ProRock XD60 semi-float and ProRock 80™.

The new Dynatrac ProRock XD60 starts with a highly engineered center-section cast from high-strength nodular iron. The patented ProRock® design provides the best ground clearance in the industry. The ProRock XD60 is 100 percent made in the USA.

20161031164354-c62645a5-me.jpg


20161031164354-5afcc12d-me.jpg


This newest Dynatrac center-section uses a standard-cut ring-and-pinion gear set, providing maximum strength for rear-axle applications on 4x4 vehicles with large tires. The axle tubes have also been strengthened, using 4-inch outside-diameter tubing with various wall thicknesses. This combination of a larger diameter without excessive tube-wall thickness provides incredible strength without adding unneeded weight, making the ProRock XD60 the strongest and lightest rear axle in its class. Additional strength is provided through the Dynatrac full-float design that includes 100 percent USA-made 35-spline floating shafts; 40-spline shafts are available as an option.

The Dynatrac standard-cut, full-float ProRock XD60 is available with the same exclusive and revolutionary strength features of our ProRock XD60 high-pinion, reverse-cut axle introduced last year. Using CAD/FEA and advanced engineering tools, Dynatrac designed the new center-section for more rigidity, increasing the stability of critical tolerances during high stress for unmatched ring-and-pinion durability. It is also available with oversized carrier and pinion bearings, providing a 50 percent load capacity increase over standard Dana 60 bearing sets.

The ProRock XD60 is the only axle in its class specifically designed to support 40-spline chromoly axleshafts with a Dynatrac-exclusive 40-spline ARB Air Locker. This air locker is equipped with the industry’s first oversized carrier bearing trunnion, which will not deform nor cone-out under severe loads. Both 35- and 40-spline axleshaft and differential options are available in this same axle. This allows customers to upgrade to 40-spline shafts at a later time when their appetite for tougher trails increases with their skills and experience.
 

wayoflife

Administrator
Staff member
You really have to see this thing in person to really appreciate just how beefy it is without having excessive weight or being so big. It's really just so cool that you can get all the beneficial properties of an XD60 but with the added strength of a standard cut gear/low pinion design.

20161101231059-548584c8-me.jpg


20161101231055-5f3b8d9d-me.jpg


20161101231052-41fed7d0-me.jpg


20161101231048-6135edda-me.jpg
 

JKRicky

Member
Really excited to pick up a set. Guys keep talking about the Ultimate 60's but I always say you have to see the Dynatrac's in person to appreciate the quality compared to others. They truly are amazing.


Sent from my iPhone using WAYALIFE mobile app
 

wayoflife

Administrator
Staff member
Really excited to pick up a set. Guys keep talking about the Ultimate 60's but I always say you have to see the Dynatrac's in person to appreciate the quality compared to others. They truly are amazing.


Sent from my iPhone using WAYALIFE mobile app

Agreed and now the price point for a set of ProRocks is so much more competitive, I think it'd be hard to justify anything less.
 

Fridge81

Member
I am sooo glad I have waited on the purchase of axles. I bet the ultimate fanboys are shooting themselves in the foot after seeing a SET of Dynatrac 60s at this price point...haha! A wise man once told me that patience is a virtue. I am happy I heeded his advise. Sooooo stoked about this!


Sent from my iPad using WAYALIFE mobile app
 

RSQCON

Member
4" Axle tubes!!! Wonder what the price point will be on this compared to a standard Prorock 60 in their package deals
 
Top Bottom