kferrarini
New member
I have the teraflex 2.5 suspension with axle side track brack relocation bracket. The axle side trackbar bolt is rubbing my rear driver spring. Anyone else have this issue? Know a fix?
Teraflex 2.5 suspension rear bolt clearance
- Thread starter kferrarini
- Start date
Chrismendoza10
Member
silverbullet88
New member
I'll check in the morning. Did you use all the washers? I feel like there were a few at that step.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
Petzl88
New member
Do you still have the stock coils with coil spacers on top? Or are they aftermarket coils?
I have the same rear track bar bracket and the bolt does not hit the spring because I have JKS coil springs and the rear is smaller in diameter than the stock coils.
Can you turn that bolt around so the bolt head is on the coil side and the nut is facing the rear of the Jeep?
Sent from my iPhone using WAYALIFE mobile app
silverbullet88
New member
Have you tried reversing the bolt?