View Full Version : 1999 Jeep XJ Crawler Expedition Rig

01-18-2013, 09:31 PM
1999 Jeep Cherokee XJ Sport
Front Axle - Currie F9 housing, High Pinion Center 3rd member, Chromo inner/outer shafts, Dedenbear knuckles, Warn hubs 4.86 gears, Detroit Truetrac Diff
Rear Axle - Currie HD 9 Inch, 9 Inch Plus 3rd member, 4.86 gears, spool, Rear Pinion Guard
Engine - Gibson Exhaust, Banks Header, K&N FIPK, BBK 62MM Throttle Body, Accell 23lb injectors, Pertronix Firepower wires/coil/rotor
Transmission - AW4, Superlift TrueSpeed speedo calibration unit
Transfercase - NP231, Currie Slip Yoke eliminator, TeraFlex 4:1 and new chain
Driveshafts - Tom Woods 1310 CV's front/rear
Suspension Front - Poly Performance 3-link front, Deaver 5" Coils, Bilstein 5150's, Currie Antirock swaybar
Suspension Rear - Deaver 5 inch spring pack, Bilstein 5150's, Poly Performance HD spring hangers, Extended shackles
Steering - West Texas Offroad Hydro Assist, rebuilt box , new RAM/pump hoses, Currie Currectlync steering, C-Rok steering box brace (with inner bracket)
Wheels - 5 - Trail-Ready aluminium beadlocks with 4 trips on them, (5th wheel is brand new)
Tires - 37x12.5.17 BFG KM2s, some rack rash, front about 50%, rears about 70%.
Winch - Warn 9.5XP with MasterPull synthetic rope, aluminum fairlead

T&J Performance 8 point Internal Roll Cage(very clean, still can fit 4 adults)
Hanson Offroad XJ Rocker Guards
Daystar Bumpers Front and Rear
ARB Roof Rack
Tow Bar setup for flat tow
New Sony stereo(USB,MP3 input)4 x new Polk Audio 6.5", 10 inch powered sub tube(quickly removable)
WeatherTech floor mats front and rear
Optima Blue Top


Pictures can been seen here.



1hundreddollarbill@gmail.com for more info.


01-18-2013, 09:46 PM
Interested in selling the winch separate?

Sent from my ADR6350 using WAYALIFE mobile app

01-18-2013, 09:50 PM
I am working a deal that does not include the winch at the moment, we will see if it goes through.

01-19-2013, 11:59 PM
Ok, pm me if it is available