Those of you running 40s

Basscat

Basscat

Member
With a full width Dynatrac (68 1/2") and 40s running about 3 1/2 to 4 1/2 inches of lift can you get away with 4.5" of backspacing or does one have to go with 4"? I'm assuming the required trimming of pinch seems and high clearance fenders by the way.

Thanks


Sent from my iPad using WAYALIFE mobile app
 
wayoflife

wayoflife

Administrator
Staff member
Depends on whether or not you're running 13.50 wide tires or 15.50 wide tires. It also depends on what suspension system you're running as something like the bypass shocks on an EVO DTD will get in the way with too much back spacing. 4" with 13.50's is about as high as I would go with standard full width axles.
 
Basscat

Basscat

Member
wayoflife said:
Depends on whether or not you're running 13.50 wide tires or 15.50 wide tires. It also depends on what suspension system you're running as something like the bypass shocks on an EVO DTD will get in the way with too much back spacing. 4" with 13.50's is about as high as I would go with standard full width axles.
Click to expand...

Good point. Forgot to mention that. Would be running 40x13.50r17 with an EVO Double Down Pro coilover set up.


Sent from my iPad using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom