5 point harness install, seat belt removal

RichW

New member

• Jul 7, 2017

• #1

I'm installing corbeau seats and 5 point harnesses on my 08 2 dr. I want to completely remove the factory seat belts. There is an airbag connector attached to the seatbelt assembly, if you unplug it the airbag light comes on. Can this connector be jumpered or is there another solution to turn off the light and have the airbag system operate properly. Thanks in advance for any info provided.

Sent from my SAMSUNG-SM-G891A using WAYALIFE mobile app

 

RichW

New member

• Jul 10, 2017

• #2

No one has any experience with this?

Sent from my SAMSUNG-SM-G891A using WAYALIFE mobile app

 

TrainWreck618

Caught the Bug

• Jul 10, 2017

• #3

I was able to re-attach the airbag sensor to my Mastercraft seats. I'm not sure how you would do this with the Corbeau seats, but I'm sure it could be done


Sent from my iPhone using WAYALIFE mobile app

 

RichW

New member

• Jul 10, 2017

• #4

This is the one on the seat belt tensioner, I reattached the one under the seat to the new seat. With the harnesses I wanted to get rid of all the factory seat belt parts.

Sent from my SAMSUNG-SM-G891A using WAYALIFE mobile app

 

JK_Dave

Caught the Bug

• Jul 11, 2017

• #5

A better question is why do you want to remove the factory seatbelt so bad?

Use this and call it a day: Rock Hard 4x4 Ding Delete

 

RichW

New member

• Jul 11, 2017

• #6

JK_Dave said:

A better question is why do you want to remove the factory seatbelt so bad?

Use this and call it a day: Rock Hard 4x4 Ding Delete

Click to expand...

Just for a cleaner look. I've eliminated the ding and light from the seat side. But the tensioner can't be removed because it has an air bag sensor in it as well. Just looking for a way to remove the tensioner and not disable the airbag system.

Sent from my SAMSUNG-SM-G891A using WAYALIFE mobile app