Drive lines

EdL

EdL

New member
Has any one upgraded to cv type drive lines.
I did but was told the cv joint needs greased every 1000 miles what a pain it hast to be removed and you use a needle type grease gun to grease it.

Sent from my SM-G930V using WAYALIFE mobile app
 
Speedy_RCW

Speedy_RCW

Hooked
EdL said:
Has any one upgraded to cv type drive lines.
I did but was told the cv joint needs greased every 1000 miles what a pain it hast to be removed and you use a needle type grease gun to grease it.

Sent from my SM-G930V using WAYALIFE mobile app
Click to expand...

A ton of people are running these. I generally grease both front and rear when I do an oil change or after deep water crossings. Every 1k miles is overkill in my opinion.


Sent from my iPhone using WAYALIFE mobile app
 
VeruGE*144

VeruGE*144

Caught the Bug
I run Adams CV shafts with grease able u joints. I grease them every oil change, before a long drive or just once every 6 months. I don't take them out to grease. You can jack up your jeep a little to spin the driveline to align the zerks


Sent from my iPhone using WAYALIFE mobile app
 
QuicksilverJK

QuicksilverJK

Caught the Bug
I believe he is referring to the center needle grease fitting that is between the u-joints to grease the CV assembly. Can be a real bitch to get to depending on drive line angle.


Sent from my iPhone using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom