Going from 3 to 2 inch lift help

MSJKU11

MSJKU11

Caught the Bug
The lift I currently have has the upgraded pitman arm, front and rear trackbar brackets, front lower control arms, rear sway bar links. Will I need to find stock parts or will these aftermarket parts not cause any issues?

Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app
 
VeruGE*144

VeruGE*144

Caught the Bug
Dropped pitman arms seem to be a pain the butt. You are better off getting a flip kit and running front track bar bracket at the axle.

You really want your track bar and drag link to be as close to parallel with each other as you can get but with the 2” lift you might be able to just run stock pitman arm


Sent from my iPhone using WAYALIFE mobile app
 
Last edited:
JKbrick

JKbrick

Active Member
This ^^^^ I'm running a EVO leveling kit that netted 3" and an running stock steering and track bars. Just get the proper sway bar links and your good. The adjustable lower front arms won't hurt anything either. Def get a stock pitman arm back on there


Sent from my iPhone using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom