Lift conversion question

MSJKU11

Caught the Bug
Replacing my RC 3.5 lift and was wondering something. I'm slowing changing out parts to the evo enforcer stage 1. The RC came with a dropped pitman arm which I'm replacing with a stock arm and drag link flip. The RC kit also came with a front and rear trackbar bracket. Should I replace the rear with evo or leave it be until it needs replacing due to wear or is there some better geometry going on with the evo one? On the front, should I just ditch it? Thanks in advance guys

Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app
 

JKbrick

Active Member
On the front if you flip the drag link you will want to raise the track bar too. If not you will get bump steer. You will want 3” of bump stop too


Sent from my iPad using WAYALIFE mobile app
 

MSJKU11

Caught the Bug
Evo's drag link flip comes with the bracket I see. So that will just be replaced then. I do have 3 in bumpstops already on from the previous kit.

Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app
 
Top Bottom