Drivers side tailight/turn signal blowing fuses

SheaVertwot

New member

• Mar 6, 2018

• #1

Hey guys,
My drivers side tailight and front turn sig are out. The hazards turn on in the tailight when i turn them on, and the blinker works in the turn signal. When i put a new fuse in and turn the lights on, it blows the fuse which leads me to believe I have a short somewhere. When I have both the tailights and turn signal unplugged and turn the lights on it still blows the M17 fuse. Have you guys ever come across this issue? It's driving me nuts

 

jeeeep

Hooked

• Mar 6, 2018

• #2

you may have had something chew up the wiring, I'd start by making sure the main wiring harness connectors are all seated correctly.

 

SheaVertwot

New member

• Mar 6, 2018

• #3

jeeeep said:

you may have had something chew up the wiring, I'd start by making sure the main wiring harness connectors are all seated correctly.

Click to expand...

After disconnecting my back up camera tailights and turn signal, turns out it was my poison spyder license plate light.
Some water must've gotten in there & was shorting out pretty much all of the drivers side lights :clap2:

 

SheaVertwot

New member

• Mar 7, 2018

• #4

Scratch that, short happened again probably an exposed wire


Sent from my iPhone using WAYALIFE mobile app

 

jeeeep

Hooked

• Mar 7, 2018

• #5

at least you're getting closer to the source of the issue :beer: