Coil overs stop ring

rogerk93

New member

• May 9, 2018

• #1

Ok so my coil overs came in today and I noticed that the stop ring are a few inches from the top which dosent seem right. If you guys have any pictures of where you have yours set or any insight to where I should have them set?


Sent from my iPhone using WAYALIFE mobile app

 

rogerk93

New member

• May 9, 2018

• #2

I know the picture is not a good one to show you where they are but that’s the only one I took


Sent from my iPhone using WAYALIFE mobile app

 

Gobicon2017

New member

• May 9, 2018

• #3

rogerk93 said:

I know the picture is not a good one to show you where they are but that’s the only one I took


Sent from my iPhone using WAYALIFE mobile app

Click to expand...

Here ya go. I have mine set at 3/4” above slider.


Sent from my iPad using WAYALIFE mobile app

 

Gobicon2017

New member

• May 9, 2018

• #4

Might also check nitrogen level. Mine were all at a different psi!!!!


Sent from my iPad using WAYALIFE mobile app

 

rogerk93

New member

• May 9, 2018

• #5

Yea these came way off then,I have to do an adjustment to them and once I get to test them adjust it a little more. Now that you said that I’ll check the nitrogen to see what they are set too


Sent from my iPhone using WAYALIFE mobile app