2017 JKU Feeding Wire Through Firewall?

R

ravencr

Member
Hey guys,


I'm wiring up a Rigid Industries 20" light bar to the front bumper, and I was wondering where the easiest place to come through the firewall is. The switch will most likely be on the driver's side somewhere within easy reach. Thanks for the help,


lightbar.jpg



Chris
 
wjtstudios

wjtstudios

Hooked
There's a high existing wire penetration on the drivers side about 6" down on the fire wall and about 2" in from the quarter panel of the jeep. It goes thru a cast plate bolted to the firewall.
 
CapnMericaMyCopilot

CapnMericaMyCopilot

Member
I did mine through the firewall using a straitened clothes hanger to puncture and pull the line thru. If I remember it was foam covered in a rubbery material down by the pedals then just ran the wire up the trim on the pillar


Sent from my iPhone using WAYALIFE mobile app
 
VeruGE*144

VeruGE*144

Caught the Bug
wjtstudios said:
There's a high existing wire penetration on the drivers side about 6" down on the fire wall and about 2" in from the quarter panel of the jeep. It goes thru a cast plate bolted to the firewall.
Click to expand...

What he said, I ran so much shit through there, I might have to find a new spot soon.
 
You must log in or register to reply here.
Top Bottom